From: Mugunthan V N <mugunthan...@ti.com>
As per mmc device tree binding documentation card detect gpio has
to be active low signal. When a hardware is designed with active
high card detect, gpio polarity has to be changed with
cd-inverted dt property.
In AM335x the card detect gpio is designed as active low gpio.
So correcting the dt card detect gpio definition.
Signed-off-by: Mugunthan V N <mugunthan...@ti.com>
---
arch/arm/dts/am335x-bone-common.dtsi | 3 +--
arch/arm/dts/am335x-evm.dts | 2 +-
2 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/arch/arm/dts/am335x-bone-common.dtsi
b/arch/arm/dts/am335x-bone-common.dtsi
index a00c0cd..40a3c35 100644
--- a/arch/arm/dts/am335x-bone-common.dtsi
+++ b/arch/arm/dts/am335x-bone-common.dtsi
@@ -388,8 +388,7 @@
bus-width = <0x4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
- cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
&aes {
diff --git a/arch/arm/dts/am335x-evm.dts b/arch/arm/dts/am335x-evm.dts
index c0bc2af..a6f20af 100644
--- a/arch/arm/dts/am335x-evm.dts
+++ b/arch/arm/dts/am335x-evm.dts
@@ -717,7 +717,7 @@
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
- cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
&mmc3 {
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
