On Tue, May 10, 2016 at 02:33:47PM +0530, Lokesh Vutla wrote: > TI's Industrial Communication Engine EVM is a low cost hardware mainly > developed for industrial communication type applications using serial > or Ethernet based interfaces. This platform features TI's AM3359 with > 800MHz single core Cortex-A8 processor, 256MB DDR3, 64MB SPI flash, > 8MB NOR Flash, mmc, usb, can, dual Ethernet ports. > > For more information, look at HW user guide[1], Data manual[2]. > > Just add basic support for the moment. > > [1] > http://processors.wiki.ti.com/index.php/AM335x_Industrial_Communication_Engine_EVM_Rev2_1_HW_User_Guide > [2] http://www.ti.com/lit/ds/symlink/am3359.pdf > > Logs: http://pastebin.ubuntu.com/16342968/
OK, so this depends on the series that adds FIT+SPL to am335x which is good. But I don't want to see adding in another defconfig for this. Lets just figure out what we need to enable / change so that we can pick the correct console here at run time (which will also make the ICE v1 supportable too and beaglebone people with UART capes too). Thanks! -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot