Most new systems in U-Boot these days make use of the generic "distro"
framework which allows a user to have U-Boot scan for a bootable OS
on all available media types.
This patch converts the LS2080ARDB board to use that framework instead
of booting from a hard coded flash offset.
Signed-off-by: Alexander Graf <ag...@suse.de>
---
This obviously means that we can no longer boot from said offset. Is
that a reasonable thing to do or should I put the bootm back into the
default boot command and only do distro boot if it fails?
---
include/configs/ls2080ardb.h | 24 +++++++++++++++++++++++-
1 file changed, 23 insertions(+), 1 deletion(-)
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 5bec509..6ee6c87 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -323,10 +323,25 @@ unsigned long get_board_sys_clk(void);
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#define CONFIG_USB_STORAGE
+#undef CONFIG_CMDLINE_EDITING
+#undef CONFIG_BOOTDELAY
+#include <config_distro_defaults.h>
+
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
+ func(SCSI, scsi, 0) \
+ func(DHCP, dhcp, na)
+#include <config_distro_bootcmd.h>
+
/* Initial environment variables */
#undef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
+ "scriptaddr=0x80800000\0" \
+ "kernel_addr_r=0x81000000\0" \
+ "pxefile_addr_r=0x81000000\0" \
+ "fdt_addr_r=0x88000000\0" \
+ "ramdisk_addr_r=0x89000000\0" \
"loadaddr=0x80100000\0" \
"kernel_addr=0x100000\0" \
"ramdisk_addr=0x800000\0" \
@@ -336,8 +351,10 @@ unsigned long get_board_sys_clk(void);
"kernel_start=0x581100000\0" \
"kernel_load=0xa0000000\0" \
"kernel_size=0x2800000\0" \
+ "fdtfile=fsl-ls2080a-rdb.dtb\0" \
"mcinitcmd=fsl_mc start mc 0x580300000" \
- " 0x580800000 \0"
+ " 0x580800000 \0" \
+ BOOTENV
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTARGS "console=ttyS1,115200 root=/dev/ram0 " \
@@ -345,6 +362,11 @@ unsigned long get_board_sys_clk(void);
"ramdisk_size=0x2000000 default_hugepagesz=2m" \
" hugepagesz=2m hugepages=256"
+#undef CONFIG_BOOTCOMMAND
+#define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x580700000"
\
+ " && setenv ethact DPMAC5@xgmii" \
+ " && run distro_bootcmd"
+
/* MAC/PHY configuration */
#ifdef CONFIG_FSL_MC_ENET
#define CONFIG_PHYLIB_10G
--
1.8.5.6
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
