Hi,
On 04-05-16 23:15, Andre Przywara wrote:
As arm64 has slightly different expectations about load addresses, lets
use a different set of default addresses for things like the kernel.
As arm64 kernels don't come with a decompressor right now, reserve some
more space for really big uncompressed kernels.
Signed-off-by: Andre Przywara <andre.przyw...@arm.com>
Thanks, looks good to me applied to:
http://git.denx.de/?p=u-boot/u-boot-sunxi.git;a=shortlog;h=refs/heads/next
This will be part of my first pull-req for u-boot v2016.07.
Regards,
Hans
---
include/configs/sunxi-common.h | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 2406115..16f1a2c 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -390,6 +390,23 @@ extern int soft_i2c_gpio_scl;
#define CONFIG_PRE_CONSOLE_BUFFER
#define CONFIG_PRE_CON_BUF_SZ 4096 /* Aprox 2 80*25 screens */
+#ifdef CONFIG_ARM64
+/*
+ * Boards seem to come with at least 512MB of DRAM.
+ * The kernel should go at 512K, which is the default text offset (that will
+ * be adjusted at runtime if needed).
+ * There is no compression for arm64 kernels (yet), so leave some space
+ * for really big kernels, say 256MB for now.
+ * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd.
+ * Align the initrd to a 2MB page.
+ */
+#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(0080000))
+#define FDT_ADDR_R __stringify(SDRAM_OFFSET(FA00000))
+#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(FC00000))
+#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(FD00000))
+#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(FE00000))
+
+#else
/*
* 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc.
* 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
@@ -401,6 +418,7 @@ extern int soft_i2c_gpio_scl;
#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(3100000))
#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000))
#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000))
+#endif
#define MEM_LAYOUT_ENV_SETTINGS \
"bootm_size=0xa000000\0" \
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
