Hi Miao, On Mon, May 16, 2016 at 5:50 PM, Miao Yan <yanmiaob...@gmail.com> wrote: > Hi Bin, > > 2016-05-16 16:47 GMT+08:00 Bin Meng <bmeng...@gmail.com>: >> Hi Miao, >> >> On Fri, May 13, 2016 at 2:29 PM, Miao Yan <yanmiaob...@gmail.com> wrote: >>> This patch splits qfw command interface and qfw core function into two >>> files, and introduces a new Kconfig option (CONFIG_QFW). for >>> qfw core. >>> >>> Now when qfw command interface is enabled, it will automatically select >>> qfw core. This patch also makes the ACPI table generation select >>> CONFIG_QFW. >>> >>> Signed-off-by: Miao Yan <yanmiaob...@gmail.com> >>> --- >>> arch/x86/Kconfig | 2 +- >>> arch/x86/cpu/mp_init.c | 6 +- >>> arch/x86/cpu/qemu/Makefile | 3 +- >>> arch/x86/cpu/qemu/acpi_table.c | 2 + >>> arch/x86/cpu/qemu/qemu.c | 4 + >>> cmd/Kconfig | 1 + >>> cmd/Makefile | 2 +- >>> cmd/cmd_qfw.c | 182 +++++++++++++++++++++ >> >> The file name should be qfw.c without cmd_ >> >>> cmd/qemu_fw_cfg.c | 353 >>> ----------------------------------------- >> >> And I suspect you can also use "git mv" for cmd/qemu_fw_cfg.c. "git mv >> cmd/qemu_fw_cfg.c cmd/qfw.c" > > But there is already a qfw.c under driver/misc/, having two files > using the same name seems a bit confusing. >
No problem because they are in different directory, and the command one is in a directory named 'cmd'. Regards, Bin _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot