still crawling through the code related to FDTs, and while i see a pile of boards that define CONFIG_OF_SYSTEM_SETUP, i see very few that define the corresponding(?) ft_system_setup() routine.
$ grep -r CONFIG_OF_SYSTEM_SETUP * cmd/fdt.c:#ifdef CONFIG_OF_SYSTEM_SETUP cmd/fdt.c:#ifdef CONFIG_OF_SYSTEM_SETUP configs/apalis_t30_defconfig:CONFIG_OF_SYSTEM_SETUP=y configs/paz00_defconfig:CONFIG_OF_SYSTEM_SETUP=y configs/plutux_defconfig:CONFIG_OF_SYSTEM_SETUP=y configs/venice2_defconfig:CONFIG_OF_SYSTEM_SETUP=y configs/p2571_defconfig:CONFIG_OF_SYSTEM_SETUP=y configs/beaver_defconfig:CONFIG_OF_SYSTEM_SETUP=y configs/ventana_defconfig:CONFIG_OF_SYSTEM_SETUP=y configs/p2371-0000_defconfig:CONFIG_OF_SYSTEM_SETUP=y configs/tec-ng_defconfig:CONFIG_OF_SYSTEM_SETUP=y configs/seaboard_defconfig:CONFIG_OF_SYSTEM_SETUP=y configs/dalmore_defconfig:CONFIG_OF_SYSTEM_SETUP=y configs/harmony_defconfig:CONFIG_OF_SYSTEM_SETUP=y configs/cardhu_defconfig:CONFIG_OF_SYSTEM_SETUP=y configs/p2371-2180_defconfig:CONFIG_OF_SYSTEM_SETUP=y configs/trimslice_defconfig:CONFIG_OF_SYSTEM_SETUP=y configs/colibri_t30_defconfig:CONFIG_OF_SYSTEM_SETUP=y configs/colibri_t20_defconfig:CONFIG_OF_SYSTEM_SETUP=y configs/whistler_defconfig:CONFIG_OF_SYSTEM_SETUP=y configs/tec_defconfig:CONFIG_OF_SYSTEM_SETUP=y configs/jetson-tk1_defconfig:CONFIG_OF_SYSTEM_SETUP=y configs/e2220-1170_defconfig:CONFIG_OF_SYSTEM_SETUP=y configs/medcom-wide_defconfig:CONFIG_OF_SYSTEM_SETUP=y configs/nyan-big_defconfig:CONFIG_OF_SYSTEM_SETUP=y include/image.h:#ifdef CONFIG_OF_SYSTEM_SETUP include/fdt_support.h: * This function is called if CONFIG_OF_SYSTEM_SETUP is defined README: CONFIG_OF_SYSTEM_SETUP $ and yet ... $ grep -rw ft_system_setup * arch/arm/mach-tegra/board2.c:int ft_system_setup(void *blob, bd_t *bd) cmd/fdt.c: int err = ft_system_setup(working_fdt, gd->bd); common/image-fdt.c: fdt_ret = ft_system_setup(blob, gd->bd); include/fdt_support.h:int ft_system_setup(void *blob, bd_t *bd); Kconfig: This causes U-Boot to call ft_system_setup() before booting into README: This causes ft_system_setup() to be called before booting $ am i missing something? what is the point of a board defining that setting but not defining the associated(?) ft_system_setup() function? what else is that CONFIG setting being used for? thanks. rday -- ======================================================================== Robert P. J. Day Ottawa, Ontario, CANADA http://crashcourse.ca Twitter: http://twitter.com/rpjday LinkedIn: http://ca.linkedin.com/in/rpjday ======================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot