On 08/05/16 08:30, Beniamino Galvani wrote: > This adds platform code for the Amlogic Meson GXBaby (S905) SoC and a > board definition for ODROID-C2. This initial submission only supports > UART and Ethernet (through the existing Designware driver). DTS files > are the ones submitted to Linux arm-soc for 4.7 [1]. > > [1] https://patchwork.ozlabs.org/patch/603583/ > > Signed-off-by: Beniamino Galvani <b.galv...@gmail.com> > Reviewed-by: Simon Glass <s...@chromium.org> > --- > arch/arm/Kconfig | 9 ++ > arch/arm/Makefile | 1 + > arch/arm/dts/Makefile | 2 + > arch/arm/dts/meson-gxbb-odroidc2.dts | 69 +++++++++++++ > arch/arm/dts/meson-gxbb.dtsi | 178 > +++++++++++++++++++++++++++++++++ > arch/arm/include/asm/arch-meson/gxbb.h | 52 ++++++++++ > arch/arm/mach-meson/Kconfig | 31 ++++++ > arch/arm/mach-meson/Makefile | 7 ++ > arch/arm/mach-meson/board.c | 66 ++++++++++++ > board/hardkernel/odroid-c2/Kconfig | 12 +++ > board/hardkernel/odroid-c2/MAINTAINERS | 6 ++ > board/hardkernel/odroid-c2/Makefile | 7 ++ > board/hardkernel/odroid-c2/README | 60 +++++++++++ > board/hardkernel/odroid-c2/odroid-c2.c | 51 ++++++++++
I suggest to have s/hardkernel/amlogic/ so that we can have all the amlogic boards in the same place. Also I wonder if it's worth to have one single board file board.c so to avoid duplicating code among the boards, especially now that the DT support is still incomplete. Cheers, -- Carlo Caione _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
