On 05/24/2016 05:15 PM, Joe Hershberger wrote: > Hi Marek, > > On Sat, May 21, 2016 at 4:29 AM, Marek Vasut <ma...@denx.de> wrote: >> On 05/21/2016 05:25 AM, Wills Wang wrote: >>> >>> >>> On 05/21/2016 01:08 AM, Marek Vasut wrote: >>>> On 05/20/2016 06:43 PM, Wills Wang wrote: >>>>> >>>>> On 05/20/2016 07:59 PM, Marek Vasut wrote: >>>>>> On 05/20/2016 06:18 AM, Wills Wang wrote: >>>>>>> On 05/08/2016 11:22 PM, Marek Vasut wrote: >>>>>>>> On 05/08/2016 02:58 PM, Daniel Schwierzeck wrote: >>>>>>>> >>>>>>>> Hi! >>>>>>>> >>>>>>>>> Am 05.05.2016 um 21:34 schrieb Marek Vasut: >>>>>>>>>> Add ethernet driver for the AR933x and AR934x Atheros MIPS >>>>>>>>>> machines. >>>>>>>>>> The driver could be easily extended to other WiSoCs. >>>>>>> How to make this patch work on ar933x board? >>>>>>> I apply this patch on the top of mips/next branch and enable this >>>>>>> option >>>>>>> in menuconfig, >>>>>>> but i can't see any boot information for Ethernet. >>>>>> The Kconfig conversion is not complete. See the >>>>>> tplink_wdr4300_defconfig >>>>>> for the necessary options, it should be at least these: >>>>>> >>>>>> CONFIG_CMD_NET=y >>>>>> CONFIG_CMD_NFS=y >>>>>> CONFIG_CMD_DHCP=y >>>>>> CONFIG_CMD_PING=y >>>>>> CONFIG_NET_RANDOM_ETHADDR=y >>>>>> CONFIG_DM_ETH=y >>>>>> CONFIG_AG7XXX=y >>>>>> >>>>> I add these options and boot up as the following, but my ar933x board >>>>> don't work, >>>>> the link indicator led on router is off when plug in the cable and >>>>> execute "dhcp" command. >>>>> >>>> Hrm, I have no idea, sorry, you'd have to dive in. It works on the board >>>> I have. The ar933x is such a junk chip that I kinda gave up on it. I >>>> also tested this on ar934x (my primary test platform) and it works. >>>> >>> I boot openwrt from u-boot on my ar933x board, and the ethernet driver >>> can't find chip build-in PHY, but it work well if boot from original >>> manufacturer's >>> u-boot 1.14. >>> >>> [ 1.854519] libphy: ag71xx_mdio: probed >>> [ 2.646539] ag71xx-mdio.1: unknown phy id 'ffff:ffff' >>> [ 3.235778] ag71xx ag71xx.0: no PHY found with phy_mask=00000010 >>> >>> Do you test this situation on your ar934x platform? >>> >> Yeah, I can boot Linux 4.4.x just fine and ethernet does work, but keep >> in mind that ethernet does work for me in U-Boot as well. > > Are you planning to send a v2?
I think Wills sent a subsequent patch which fixes DT for him, so feel free to pick this one and his fixes. -- Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
