> -----Original Message----- > From: Felipe Balbi [mailto:felipe.ba...@linux.intel.com] > Sent: Wednesday, June 01, 2016 12:07 PM > To: Rajesh Bhagat <rajesh.bha...@nxp.com>; Marek Vasut <ma...@denx.de>; > Rajat Srivastava <rajat.srivast...@nxp.com>; u-boot@lists.denx.de > Cc: l.majew...@samsung.com; s...@chromium.org; albert.u.b...@aribaud.net; > prabha...@freescale.com; york sun <york....@nxp.com>; Mingkai Hu > <mingkai...@nxp.com>; michal.si...@xilinx.com > Subject: RE: [PATCH 2/3] armv8/fsl-layerscape: add dwc3 gadget driver support > > > Hi, > > Rajesh Bhagat <rajesh.bha...@nxp.com> writes: > >> Marek Vasut <ma...@denx.de> writes: > >> >> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c > >> >> index 85cc96a..5eeb71d 100644 > >> >> --- a/drivers/usb/dwc3/core.c > >> >> +++ b/drivers/usb/dwc3/core.c > >> >> @@ -690,6 +690,18 @@ int dwc3_uboot_init(struct dwc3_device *dwc3_dev) > >> >> return -ENOMEM; > >> >> } > >> >> > >> >> +#if defined(CONFIG_LS1043A) > >> > > >> > How was this added in Linux ? I doubt such horrid ifdef was allowed. > >> > I presume it went through either DT or struct dwc3_device, right ? > >> > So fix this here the same way. > >> > >> dwc3 doesn't have any of that. I wouldn't take it :-p > >> > > > > Hello Felipe/Marek, > > > > It is not currently added in Linux, These registers setting is > > required for Setting the burst beat transactions and enabling the snooping > > for DWC3 > USB IP. > > that's fine, but you don't need to ifdef around that. Pass these values from > your > platform code. > > > Can it be added using dwc3 uboot glue layer e.g. dwc3-fsl.c ? > > keep in core, but pass them from plat code instead of hardcoding under ifdef. > > Also, get rid of the magic constant ;-) >
Ok, thanks. Will take care in v2. > -- > balbi _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot