On 8 June 2016 at 06:07, Bin Meng <bmeng...@gmail.com> wrote: > At present all BayTrail boards configure fsp,emmc-boot-mode to 2, > which means "eMMC 4.1" per FSP documentation. However, eMMC 4.1 > only shows up on some early stepping silicon of BayTrail SoC. > Newer stepping SoC integrates an eMMC 4.5 controller. Intel FSP > provides a config option fsp,emmc-boot-mode which tells FSP which > eMMC controller it initializes. Instead of hardcoded to 2, now > we change it to 1 which means "auto". > > With this change, MinnowMax board (with a D0 stepping BayTrail SoC) > can see the eMMC 4.5 controller at PCI address 00.17.00 via U-Boot > 'pci' command. > > Signed-off-by: Bin Meng <bmeng...@gmail.com> > --- > > arch/x86/dts/bayleybay.dts | 2 +- > arch/x86/dts/conga-qeval20-qa3-e3845.dts | 2 +- > arch/x86/dts/minnowmax.dts | 2 +- > 3 files changed, 3 insertions(+), 3 deletions(-)
Reviewed-by: Simon Glass <s...@chromium.org> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot