The cm-fx6 module has an on-board spi flash chip. Enable mtd support
and the mtdparts command. Also define a default partitioning, add
it to the default environment, and enable support to overwrite the
partitioning defined in a device tree by it.
These changes move the effective default partitioning from the device
tree shipped with the vendor kernels to u-boot which becomes the single
point of definition for the partitioning for all device tree based
kernels (in particular, for the upstream linux kernel which does not
have a default partitioning defined in its device tree).
Signed-off-by: Christopher Spinrath <christopher.spinr...@rwth-aachen.de>
---
include/configs/cm_fx6.h | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h
index f054ca8..c839b03 100644
--- a/include/configs/cm_fx6.h
+++ b/include/configs/cm_fx6.h
@@ -18,6 +18,7 @@
#define CONFIG_MACH_TYPE 4273
/* CMD */
+#define CONFIG_CMD_MTDPARTS
/* MMC */
#define CONFIG_SYS_FSL_USDHC_NUM 3
@@ -53,6 +54,20 @@
#define CONFIG_SF_DEFAULT_SPEED 25000000
#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
+/* MTD support */
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_FDT_FIXUP_PARTITIONS
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_SPI_FLASH_MTD
+#endif
+
+#define MTDIDS_DEFAULT "nor0=spi0.0"
+#define MTDPARTS_DEFAULT "mtdparts=spi0.0:" \
+ "768k(uboot)," \
+ "256k(uboot-environment)," \
+ "-(reserved)"
+
/* Environment */
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
@@ -83,6 +98,8 @@
"video_dvi=mxcfb0:dev=dvi,1280x800M-32@50,if=RGB32\0" \
"doboot=bootm ${loadaddr}\0" \
"doloadfdt=false\0" \
+ "mtdids=" MTDIDS_DEFAULT "\0" \
+ "mtdparts=" MTDPARTS_DEFAULT "\0" \
"setboottypez=setenv kernel ${zImage};" \
"setenv doboot bootz ${loadaddr} - ${fdtaddr};" \
"setenv doloadfdt true;\0" \
@@ -157,7 +174,7 @@
"run setupnandboot;" \
"run nandboot;"
-#define CONFIG_PREBOOT "usb start"
+#define CONFIG_PREBOOT "usb start;sf probe"
/* SPI */
#define CONFIG_SPI
--
2.8.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
