From: Daniel Allred <d-all...@ti.com>
Add an interface for calling secure ROM APIs across a range of OMAP and
OMAP compatible high-security (HS) device variants. While at it, also
perform minor cleanup/alignment without any change in functionality.
Signed-off-by: Daniel Allred <d-all...@ti.com>
Signed-off-by: Andreas Dannenberg <dannenb...@ti.com>
Reviewed-by: Simon Glass <s...@chromium.org>
---
arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 45 ++++++++++++++++++++------
arch/arm/include/asm/omap_common.h | 6 ++++
2 files changed, 42 insertions(+), 9 deletions(-)
diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
index 5283135..66a3b3d 100644
--- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
@@ -16,9 +16,10 @@
#include <asm/arch/spl.h>
#include <linux/linkage.h>
+.arch_extension sec
+
#ifdef CONFIG_SPL
ENTRY(save_boot_params)
-
ldr r1, =OMAP_SRAM_SCRATCH_BOOT_PARAMS
str r0, [r1]
b save_boot_params_ret
@@ -26,14 +27,40 @@ ENDPROC(save_boot_params)
#endif
ENTRY(omap_smc1)
- PUSH {r4-r12, lr} @ save registers - ROM code may pollute
+ push {r4-r12, lr} @ save registers - ROM code may pollute
@ our registers
- MOV r12, r0 @ Service
- MOV r0, r1 @ Argument
- DSB
- DMB
- .word 0xe1600070 @ SMC #0 - hand assembled for GCC versions
- @ call ROM Code API for the service requested
+ mov r12, r0 @ Service
+ mov r0, r1 @ Argument
- POP {r4-r12, pc}
+ dsb
+ dmb
+ smc 0 @ SMC #0 to enter monitor mode
+ @ call ROM Code API for the service requested
+ pop {r4-r12, pc}
ENDPROC(omap_smc1)
+
+ENTRY(omap_smc_sec)
+ push {r4-r12, lr} @ save registers - ROM code may pollute
+ @ our registers
+ mov r6, #0xFF @ Indicate new Task call
+ mov r12, #0x00 @ Secure Service ID in R12
+
+ dsb
+ dmb
+ smc 0 @ SMC #0 to enter monitor mode
+
+ b omap_smc_sec_end @ exit at end of the service execution
+ nop
+
+ @ In case of IRQ happening in Secure, then ARM will branch here.
+ @ At that moment, IRQ will be pending and ARM will jump to Non Secure
+ @ IRQ handler
+ mov r12, #0xFE
+
+ dsb
+ dmb
+ smc 0 @ SMC #0 to enter monitor mode
+
+omap_smc_sec_end:
+ pop {r4-r12, pc}
+ENDPROC(omap_smc_sec)
diff --git a/arch/arm/include/asm/omap_common.h
b/arch/arm/include/asm/omap_common.h
index 07f3848..605c549 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -627,6 +627,12 @@ void recalibrate_iodelay(void);
void omap_smc1(u32 service, u32 val);
+/*
+ * Low-level helper function used when performing secure ROM calls on high-
+ * security (HS) device variants by doing a specially-formed smc entry.
+ */
+u32 omap_smc_sec(u32 service, u32 proc_id, u32 flag, u32 *params);
+
void enable_edma3_clocks(void);
void disable_edma3_clocks(void);
--
2.6.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
