Hi Benjamin, Please keep all the involved developers in the "To" of the e-mail & resend the patchset for review comments (checkout scripts/get_maintainer.pl). Also separate the generic stuff (dts/led) from platform specific in another patchset.
Cheers, Vikas > -----Original Message----- > From: U-Boot [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Benjamin > Tietz > Sent: Monday, June 20, 2016 11:26 AM > To: u-boot@lists.denx.de > Subject: [U-Boot] [PATCH 2 00/22] DM: Cmd: GPIO/LED/STM32/CLK: provide > command-line support for device-tree configured gpios and leds > > This series begins to provide device-tree support on stm32 devices, starting > with a the stack of a simple clock-driver (at least enabling/disabling > peripheral clocks), the gpio driver and leds. > > As the current led command-line interface isn't aware of any device-tree > configured led, the command gets rewritten and extended for device-tree > LEDs on the way. These changes are architecture indipendent. > > To accomplish these changes the led-uclass driver had to be extended, too. > > Changes in v2: > * more verbose commit messages > * correct clock calculation in stm32_clk > * minor adjustments > > > --- > > Benjamin Tietz (22): > stm32: gpio: fix otype access > stm32: gpio_direction_output: make sure, output is set to push-pull > stm32: gpio_get_value: always return 0 or 1 > stm32f429-discovery: config: enable status leds > Cmd: led: provide a selector in kconfig > DTS: stm32f429: provide device-tree files (from linux kernel) > clock-uclass: allow disabling a peripheral clock > STM32: clock: provide dts-accessible clock driver > DTS: STM32f429: add gpio-banks > STM32: gpio: group SOC-specific code to one ifdef/elif construct > GPIO: STM32: make DTS-aware > STM32F429-discovery: led: disable board-specific code, if DM is selected > GPIO/LED: make more robust, if STATUS_LED isn't selected > Cmd: LED: rewrite to prepare non-static access > DTS: STM32F429-disco: add board leds and enable rcc > LED: add function to retrieve a device's label > LED: provide function to count and get all (DM-)LEDs > cmd: LED: be aware of DTS-configured leds > LED: provide functionality to get led status > LED: GPIO: provide get_on() op > LED: provide toggling interface > Cmd: LED: make DM-leds toggle > > > arch/arm/dts/Makefile | 2 > arch/arm/dts/armv7-m.dtsi | 24 ++ > arch/arm/dts/stm32429i-eval.dts | 75 ++++++ > arch/arm/dts/stm32f429-disco.dts | 97 ++++++++ > arch/arm/dts/stm32f429.dtsi | 282 +++++++++++++++++++++++ > board/st/stm32f429-discovery/Makefile | 3 > cmd/Kconfig | 4 > cmd/led.c | 401 > ++++++++++++++++++++++++--------- > drivers/clk/Kconfig | 4 > drivers/clk/Makefile | 1 > drivers/clk/clk-uclass.c | 10 + > drivers/clk/clk_stm32.c | 112 +++++++++ > drivers/gpio/stm32_gpio.c | 202 ++++++++++++++--- > drivers/led/led-uclass.c | 83 +++++++ > drivers/led/led_gpio.c | 11 + > drivers/misc/gpio_led.c | 4 > drivers/misc/status_led.c | 2 > include/clk.h | 18 + > include/configs/stm32f429-discovery.h | 14 + > include/led.h | 65 +++++ > include/status_led.h | 4 > 21 files changed, 1277 insertions(+), 141 deletions(-) create mode 100644 > arch/arm/dts/armv7-m.dtsi create mode 100644 arch/arm/dts/stm32429i- > eval.dts create mode 100644 arch/arm/dts/stm32f429-disco.dts create > mode 100644 arch/arm/dts/stm32f429.dtsi create mode 100644 > drivers/clk/clk_stm32.c > > -- > > best regards > Benjamin Tietz > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot