On 19 July 2016 at 14:40, Siva Durga Prasad Paladugu <siva.durga.palad...@xilinx.com> wrote: > Dont set quad enable for micron devices in all cases > Setting the quad enable bit in micron expects all other > commands like register reads on quad lines which may > not be supported by some controllers. Hence, dont > set the quad enable if controller driver sets the > no_all_quad.
Sorry, I'm not fond of controller hacks, please try for any other solution and even planning to remove existing ones. thanks! -- Jagan. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
