On 22/07/2016 14:12, Breno Lima wrote:
> It's not necessary to implement the is_mx6q function, there is a macro in
> sys_proto.h already implemented.
>
> Signed-off-by: Breno Lima <breno.l...@nxp.com>
> ---
> board/congatec/cgtqmx6eval/cgtqmx6eval.c | 14 +++-----------
> 1 file changed, 3 insertions(+), 11 deletions(-)
>
> diff --git a/board/congatec/cgtqmx6eval/cgtqmx6eval.c
> b/board/congatec/cgtqmx6eval/cgtqmx6eval.c
> index 225de7c..3fbd3d2 100644
> --- a/board/congatec/cgtqmx6eval/cgtqmx6eval.c
> +++ b/board/congatec/cgtqmx6eval/cgtqmx6eval.c
> @@ -678,14 +678,6 @@ int overwrite_console(void)
> return 1;
> }
>
> -static bool is_mx6q(void)
> -{
> - if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D))
> - return true;
> - else
> - return false;
> -}
> -
> int board_early_init_f(void)
> {
> setup_iomux_uart();
> @@ -703,7 +695,7 @@ int board_init(void)
> gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
>
>
> - if (is_mx6q())
> + if (is_mx6dq())
> setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c_pad_info1);
> else
> setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info1);
> @@ -760,7 +752,7 @@ int misc_init_r(void)
> int board_late_init(void)
> {
> #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
> - if (is_mx6q())
> + if (is_mx6dq())
> setenv("board_rev", "MX6Q");
> else
> setenv("board_rev", "MX6DL");
> @@ -1053,7 +1045,7 @@ static void spl_dram_init(int width)
> return;
> }
>
> - if (is_mx6q()) {
> + if (is_mx6dq()) {
> mx6dq_dram_iocfg(width, &mx6q_ddr_ioregs, &mx6q_grp_ioregs);
> mx6_dram_cfg(&sysinfo, &mx6q_mmcd_calib, &mem_ddr_2g);
> } else if (is_cpu_type(MXC_CPU_MX6SOLO)) {
>
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=====================================================================
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
