Hello Joakim, Joakim Tjernlund wrote: > After issuing a STOP one must wait until the STOP has completed > on the bus before doing something new to the controller. > > Also add an extra read of SR as the manual mentions doing that > is a good idea. > > Remove surplus write of CR just before a write, isn't required and > could potentially disturb the I2C bus. > > Signed-off-by: Joakim Tjernlund <joakim.tjernl...@transmode.se> > --- > drivers/i2c/fsl_i2c.c | 12 ++++++++---- > 1 files changed, 8 insertions(+), 4 deletions(-)
Applied to u-boot-i2c testing I applied your 3 patches at the moment to the u-boot-i2c testing branch, in the hope to see some "Tested-by" ;-) Thanks. bye Heiko -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
