Add Kconfig entry for the driver, remove #define CONFIG_ETHOC from the
only board configuration that uses it and put it into that board's
defconfig.
Cc: Stefan Kristiansson <stefan.kristians...@saunalahti.fi>
Signed-off-by: Max Filippov <jcmvb...@gmail.com>
Acked-by: Joe Hershberger <joe.hershber...@ni.com>
---
configs/openrisc-generic_defconfig | 2 ++
drivers/net/Kconfig | 5 +++++
include/configs/openrisc-generic.h | 1 -
3 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/configs/openrisc-generic_defconfig
b/configs/openrisc-generic_defconfig
index 14923c0..5bc81cc 100644
--- a/configs/openrisc-generic_defconfig
+++ b/configs/openrisc-generic_defconfig
@@ -6,5 +6,7 @@ CONFIG_TARGET_OPENRISC_GENERIC=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
+CONFIG_NETDEVICES=y
+CONFIG_ETHOC=y
CONFIG_SYS_NS16550=y
# CONFIG_AUTOBOOT is not set
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 88d8e83..be3ed73 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -124,6 +124,11 @@ config ETH_DESIGNWARE
100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
provide the PHY (physical media interface).
+config ETHOC
+ bool "OpenCores 10/100 Mbps Ethernet MAC"
+ help
+ This MAC is present in OpenRISC and Xtensa XTFPGA boards.
+
config MVPP2
bool "Marvell Armada 375 network interface support"
depends on ARMADA_375
diff --git a/include/configs/openrisc-generic.h
b/include/configs/openrisc-generic.h
index 913256a..227c0ca 100644
--- a/include/configs/openrisc-generic.h
+++ b/include/configs/openrisc-generic.h
@@ -44,7 +44,6 @@
/*
* Ethernet
*/
-#define CONFIG_ETHOC
#define CONFIG_SYS_ETHOC_BASE 0x92000000
#define CONFIG_BOOTFILE "boot.img"
--
2.1.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
