> > diff --git a/cpu/mpc85xx/cpu_init_nand.c
> > +void cpu_init_f(void)
> > +{
> > + ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
> > +
> > + /*
> > + * LCRR - Clock Ratio Register - set up local bus timing
> > + * when needed
> > + */
> > + out_be32(&lbc->lcrr, LCRR_DBYP | LCRR_CLKDIV_8);
> > +
> > +#if defined(CONFIG_NAND_BR_PRELIM) \
> > + && defined(CONFIG_NAND_OR_PRELIM)
> > + out_be32(&lbc->br0, CONFIG_NAND_BR_PRELIM);
> > + out_be32(&lbc->or0, CONFIG_NAND_OR_PRELIM);
> > + /* for FPGA */
> > + out_be32(&lbc->br3, CONFIG_SYS_BR3_PRELIM);
> > + out_be32(&lbc->or3, CONFIG_SYS_OR3_PRELIM);
> > +#else
> > +#error CONFIG_NAND_BR_PRELIM, CONFIG_NAND_OR_PRELIM must
> be defined
> > +#endif
> > +
>
> Should we not have br/or1, br/or2, etc?
>
And FPGA stuff put here cpu/mpc85xx.....
It is *not* good practice and should be move out from here.
I know the FPGA is for UART clock.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
