Hi Fabio, On 12/08/2016 21:38, Fabio Estevam wrote: > Hi Otavio, > > On Fri, Aug 12, 2016 at 3:27 PM, Otavio Salvador > <otavio.salva...@ossystems.com.br> wrote: > >> Why is this happening? I am fine in reverting this but we need to fix >> the detection. Is it due memory callibration problems? > > The problem here is that warp uses the DDR initialization from mx6sl-evk. > > From configs/mx6slevk_defconfig: > CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL" > > The usage of imx_ddr_size() revealed that the DDR size is not being > programmed correctly for the warp board. >
That means that reverting just hides the problem. > The proper way to fix this is to create a board/warp/imximage.cfg file > with the DDR configuration done specifically for this board. > > Then imx_ddr_size() should work without issues for warp. > > Until this is done, better go with the revert patch for now: > > Tested-by: Fabio Estevam <fabio.este...@nxp.com> Let's say: if there won't be any fix before the release, it is ok to revert this. Regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot