Hi Stefan, On Mon, Aug 15, 2016 at 5:11 PM, Stefan Roese <s...@denx.de> wrote: > Hi Bin, > > > On 12.08.2016 04:41, Bin Meng wrote: >> >> On Fri, Aug 12, 2016 at 9:44 AM, Bin Meng <bmeng...@gmail.com> wrote: >>> >>> On Tue, Jul 19, 2016 at 1:51 PM, Stefan Roese <s...@denx.de> wrote: >>>> >>>> This patch adds support for the DFI BayTrail BT700 QSeven SoM installed >>>> on the DFI Q7X-151 baseboard. The baseboard is equipped with the Nuvoton >>>> NCT6102D Super IO chip providing the UART as console. >>>> >>>> Signed-off-by: Stefan Roese <s...@denx.de> >>>> Cc: Simon Glass <s...@chromium.org> >>>> Reviewed-by: Bin Meng <bmeng...@gmail.com> >>>> --- >>>> v3: >>>> - Change comment Winbond > Nuvoton >>>> - Remove unneeded compatible property in HS-UART DTS node >>>> >>>> v2: >>>> - Added missing text to Kconfig entry >>>> >>>> arch/x86/Kconfig | 4 + >>>> arch/x86/dts/Makefile | 1 + >>>> arch/x86/dts/dfi-bt700-q7x-151.dts | 22 +++ >>>> arch/x86/dts/dfi-bt700.dtsi | 308 >>>> ++++++++++++++++++++++++++++++ >>>> board/dfi/Kconfig | 29 +++ >>>> board/dfi/dfi-bt700/Kconfig | 28 +++ >>>> board/dfi/dfi-bt700/MAINTAINERS | 8 + >>>> board/dfi/dfi-bt700/Makefile | 8 + >>>> board/dfi/dfi-bt700/acpi/mainboard.asl | 13 ++ >>>> board/dfi/dfi-bt700/dfi-bt700.c | 30 +++ >>>> board/dfi/dfi-bt700/dsdt.asl | 14 ++ >>>> board/dfi/dfi-bt700/start.S | 9 + >>>> configs/dfi-bt700-internal-uart_defconfig | 61 ++++++ >>>> configs/dfi-bt700-q7x-151_defconfig | 63 ++++++ >>>> include/configs/dfi-bt700.h | 74 +++++++ >>>> 15 files changed, 672 insertions(+) >>>> create mode 100644 arch/x86/dts/dfi-bt700-q7x-151.dts >>>> create mode 100644 arch/x86/dts/dfi-bt700.dtsi >>>> create mode 100644 board/dfi/Kconfig >>>> create mode 100644 board/dfi/dfi-bt700/Kconfig >>>> create mode 100644 board/dfi/dfi-bt700/MAINTAINERS >>>> create mode 100644 board/dfi/dfi-bt700/Makefile >>>> create mode 100644 board/dfi/dfi-bt700/acpi/mainboard.asl >>>> create mode 100644 board/dfi/dfi-bt700/dfi-bt700.c >>>> create mode 100644 board/dfi/dfi-bt700/dsdt.asl >>>> create mode 100644 board/dfi/dfi-bt700/start.S >>>> create mode 100644 configs/dfi-bt700-internal-uart_defconfig >>>> create mode 100644 configs/dfi-bt700-q7x-151_defconfig >>>> create mode 100644 include/configs/dfi-bt700.h >>>> >>> >>> applied to u-boot-x86, thanks! >> >> >> Unfortunately the dfi-bt700-internal-uart_defconfig does not build. >> Can you please look at this? >> >> + >> +Device Tree Source is not correctly specified. >> +Please define 'CONFIG_DEFAULT_DEVICE_TREE' >> +or build with 'DEVICE_TREE=<device_tree>' argument >> +make[2]: *** [arch/x86/dts/dfi-bt700.dtb] Error 1 >> +make[1]: *** [dts/dt.dtb] Error 2 >> >> Also buildman reports the following warnings: >> >> WARNING: no status info for 'theadorable-x86-dfi-bt700' >> WARNING: no maintainers for 'theadorable-x86-dfi-bt700' >> WARNING: no status info for 'dfi-bt700-internal-uart' >> WARNING: no maintainers for 'dfi-bt700-internal-uart' >> >> WARNING: no status info for 'conga-qeval20-qa3-e3845-internal-uart' >> WARNING: no maintainers for 'conga-qeval20-qa3-e3845-internal-uart' >> >> Can you please fix these too? > > > Sorry for the problems. I'm just back from vacation and will take > a look at it today.
Thanks for checking. Please post new version patches with the additional changes and I will re-apply them. Regards, Bin _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot