Hello Stephen,
Am 16.08.2016 um 00:59 schrieb Stephen Warren:
On 08/15/2016 04:49 PM, Tom Rini wrote:
Hey guys,
Is anyone else running the crc32 tftp tests with test.py? I'm trying to
do it locally but even with a 2MiB file it looks like somehow the crc32
is never captured in the output. I've already made sure that the crc32
value is in lowercase to match the U-Boot output and running the test
steps in console gives me the expected output. And the rest of the
network tests pass, any ideas? Thanks!
I'm not certain that anyone other than myself is running test.py on real HW
(vs. sandbox where it's
trivial).
I run it on real hw, as I start test.py from tbot on at91, am335x and imx6
based boards ...
(Ok, I had to admit that I did not found time since my vacation to look,
why my cyclic automated tests with buildbot not work ...) but for an older
example:
http://xeidos.ddns.net/tests/test_db_auslesen.php#60
(may slow as tbot and this webserver runs on a raspberry pi)
and click on "test py result" to see test.py output ...
But sorry, yes, I did not run the crc32 tftp tests ...
bye,
Heiko
If you look at test-log.html it should show what U-Boot outputs on the console,
and where any error
was detected in the test. Alternativeluy, add "-s" to the invocation and U-Boot
output should show
up on stdout while the tests are running. What's the error reported there; just
a timeout waiting
for the CRC? Here's an example of what test_net_tftpboot looks like for me:
Tegra210 (P2371-2180) # tftpboot 80000000 ubtest-readable.bin
Using eth_rtl8169 device
TFTP from server 10.20.204.51; our IP address is 10.20.204.52
Filename 'ubtest-readable.bin'.
Load address: 0x80000000
Loading: *%08#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
####################
2.9 MiB/s
done
Bytes transferred = 5058624 (4d3040 hex)
Tegra210 (P2371-2180) # crc32 80000000 $filesize
crc32 for 80000000 ... 804d303f ==> c2244b26
Tegra210 (P2371-2180) #
In the past, I have seen tests pass when run manually but not under test.py,
e.g. due to heap
fragmentation, state, or corrupted memory due to earlier tests, which weren't
run in the manual
case. Might that be the issue?
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
