For FSL USB node fixup, the dt is walked multiple times for
fixing erratum and phy type. This patch walks the tree and
fixes the node till no more USB nodes are left.
Signed-off-by: Sriram Dash <sriram.d...@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bha...@nxp.com>
---
drivers/usb/common/fsl-dt-fixup.c | 108 +++++++++++++++++---------------------
1 file changed, 47 insertions(+), 61 deletions(-)
diff --git a/drivers/usb/common/fsl-dt-fixup.c
b/drivers/usb/common/fsl-dt-fixup.c
index 9c48852..df785a6 100644
--- a/drivers/usb/common/fsl-dt-fixup.c
+++ b/drivers/usb/common/fsl-dt-fixup.c
@@ -54,25 +54,19 @@ static int fdt_usb_get_node_type(void *blob, int
start_offset,
}
static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode,
- const char *phy_type, int start_offset)
+ const char *phy_type, int node_offset,
+ const char **node_type)
{
const char *prop_mode = "dr_mode";
const char *prop_type = "phy_type";
- const char *node_type = NULL;
- int node_offset;
- int err;
-
- err = fdt_usb_get_node_type(blob, start_offset,
- &node_offset, &node_type);
- if (err < 0)
- return err;
+ int err = 0;
if (mode) {
err = fdt_setprop(blob, node_offset, prop_mode, mode,
strlen(mode) + 1);
if (err < 0)
printf("WARNING: could not set %s for %s: %s.\n",
- prop_mode, node_type, fdt_strerror(err));
+ prop_mode, *node_type, fdt_strerror(err));
}
if (phy_type) {
@@ -80,52 +74,48 @@ static int fdt_fixup_usb_mode_phy_type(void *blob, const
char *mode,
strlen(phy_type) + 1);
if (err < 0)
printf("WARNING: could not set %s for %s: %s.\n",
- prop_type, node_type, fdt_strerror(err));
+ prop_type, *node_type, fdt_strerror(err));
}
- return node_offset;
+ return err;
}
static int fdt_fixup_usb_erratum(void *blob, const char *prop_erratum,
- const char *controller_type, int start_offset)
+ const char *controller_type, int node_offset,
+ const char **node_type)
{
- int node_offset, err;
- const char *node_type = NULL;
+ int err = -1;
const char *node_name = NULL;
- err = fdt_usb_get_node_type(blob, start_offset,
- &node_offset, &node_type);
- if (err < 0)
- return err;
-
- if (!strcmp(node_type, FSL_USB2_MPH) || !strcmp(node_type, FSL_USB2_DR))
+ if (!strcmp(*node_type, FSL_USB2_MPH) ||
+ !strcmp(*node_type, FSL_USB2_DR))
node_name = CHIPIDEA_USB2;
else
- node_name = node_type;
+ node_name = *node_type;
if (strcmp(node_name, controller_type))
return err;
err = fdt_setprop(blob, node_offset, prop_erratum, NULL, 0);
if (err < 0) {
printf("ERROR: could not set %s for %s: %s.\n",
- prop_erratum, node_type, fdt_strerror(err));
+ prop_erratum, *node_type, fdt_strerror(err));
}
- return node_offset;
+ return err;
}
-static int fdt_fixup_erratum(int *usb_erratum_off, void *blob,
+static int fdt_fixup_erratum(int node_offset, void *blob,
const char *controller_type, char *str,
- bool (*has_erratum)(void))
+ bool (*has_erratum)(void), const char **node_type)
{
char buf[32] = {0};
snprintf(buf, sizeof(buf), "fsl,usb-erratum-%s", str);
if (!has_erratum())
return -EINVAL;
- *usb_erratum_off = fdt_fixup_usb_erratum(blob, buf, controller_type,
- *usb_erratum_off);
- if (*usb_erratum_off < 0)
+ node_offset = fdt_fixup_usb_erratum(blob, buf, controller_type,
+ node_offset, node_type);
+ if (node_offset < 0)
return -ENOSPC;
debug("Adding USB erratum %s\n", str);
return 0;
@@ -135,23 +125,23 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd)
{
static const char * const modes[] = { "host", "peripheral", "otg" };
static const char * const phys[] = { "ulpi", "utmi", "utmi_dual" };
- int usb_erratum_a006261_off = -1;
- int usb_erratum_a007075_off = -1;
- int usb_erratum_a007792_off = -1;
- int usb_erratum_a005697_off = -1;
- int usb_erratum_a008751_off = -1;
- int usb_mode_off = -1;
- int usb_phy_off = -1;
+ const char *node_type = NULL;
+ int node_offset = -1;
char str[5];
- int i, j;
- int ret;
+ int i = 1, j;
+ int ret, err;
- for (i = 1; i <= CONFIG_USB_MAX_CONTROLLER_COUNT; i++) {
+ do {
const char *dr_mode_type = NULL;
const char *dr_phy_type = NULL;
int mode_idx = -1, phy_idx = -1;
- snprintf(str, 5, "%s%d", "usb", i);
+ err = fdt_usb_get_node_type(blob, node_offset,
+ &node_offset, &node_type);
+ if (err < 0)
+ return;
+
+ snprintf(str, 5, "%s%d", "usb", i++);
if (hwconfig(str)) {
for (j = 0; j < ARRAY_SIZE(modes); j++) {
if (hwconfig_subarg_cmp(str, "dr_mode",
@@ -184,45 +174,41 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd)
if (has_dual_phy())
dr_phy_type = phys[2];
- usb_mode_off = fdt_fixup_usb_mode_phy_type(blob,
- dr_mode_type, NULL,
- usb_mode_off);
-
- if (usb_mode_off < 0)
+ err = fdt_fixup_usb_mode_phy_type(blob, dr_mode_type, NULL,
+ node_offset, &node_type);
+ if (err < 0)
return;
- usb_phy_off = fdt_fixup_usb_mode_phy_type(blob,
- NULL, dr_phy_type,
- usb_phy_off);
-
- if (usb_phy_off < 0)
+ err = fdt_fixup_usb_mode_phy_type(blob, NULL, dr_phy_type,
+ node_offset, &node_type);
+ if (err < 0)
return;
- ret = fdt_fixup_erratum(&usb_erratum_a006261_off, blob,
+ ret = fdt_fixup_erratum(node_offset, blob,
CHIPIDEA_USB2, "a006261",
- has_erratum_a006261);
+ has_erratum_a006261, &node_type);
if (ret == -ENOSPC)
return;
- ret = fdt_fixup_erratum(&usb_erratum_a007075_off, blob,
+ ret = fdt_fixup_erratum(node_offset, blob,
CHIPIDEA_USB2, "a007075",
- has_erratum_a007075);
+ has_erratum_a007075, &node_type);
if (ret == -ENOSPC)
return;
- ret = fdt_fixup_erratum(&usb_erratum_a007792_off, blob,
+ ret = fdt_fixup_erratum(node_offset, blob,
CHIPIDEA_USB2, "a007792",
- has_erratum_a007792);
+ has_erratum_a007792, &node_type);
if (ret == -ENOSPC)
return;
- ret = fdt_fixup_erratum(&usb_erratum_a005697_off, blob,
+ ret = fdt_fixup_erratum(node_offset, blob,
CHIPIDEA_USB2, "a005697",
- has_erratum_a005697);
+ has_erratum_a005697, &node_type);
if (ret == -ENOSPC)
return;
- ret = fdt_fixup_erratum(&usb_erratum_a008751_off, blob,
+ ret = fdt_fixup_erratum(node_offset, blob,
SNPS_DWC3, "a008751",
- has_erratum_a008751);
+ has_erratum_a008751, &node_type);
if (ret == -ENOSPC)
return;
- }
+ } while (node_offset > 0);
}
--
2.1.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
