Hi Peter,
On 2016-08-17 11:31, Peter Kardos wrote:
On Mon, Aug 15, 2016 at 10:43 PM, Andreas Bießmann
<andr...@biessmann.org> wrote:
Dear Peter,
On 12.08.16 02:24, Peter Kardos wrote:
<snip>
RAM Configuration:
Bank #0: 20000000 64 MiB
DRAM: 64 MiB
initcall: 1000b424
New Stack Pointer is: 23f23ed0
initcall: 1000b6ac
initcall: 1000b640
Relocation Offset is: 13f84000
Relocating to 23f84000, new gd at 23f23ef0, sp at 23f23ed0
Could you please check, if the RAM initialisation is working
properly?
AFAIR there was some problem with the u-boot RAM initialisation
for this
board but never fixed (shame on me). Some set of known data and
read
back before relocation should do the check.
Yeah, this is my guess as well, as things seem to work up to this
point (continue exec from RAM).
Thanks for the pointer, i'll have a look at the init magic and compare
it with the old from v1.1.4.
Would be great if you come with a solution, so I could fix the
at91rm9200ek board too.
I guess the easiest way would be to mod the relocation routine and
read back what was written...
sounds good as a quick test
Andreas
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
