> -----Original Message----- > From: Prafulla Wadaskar [mailto:prafu...@marvell.com] > Sent: Monday, September 21, 2009 8:28 PM > To: u-boot@lists.denx.de > Cc: Prabhanjan Sarnaik; Ashish Karkare; Prafulla Wadaskar > Subject: [PATCH] Kirkwood: rd6281a: Add kwbimage build support > > This patch adds kwbimage configuration file > (used by mkimage utility) > to support u-boot.kwb target on rd6281a platform. > > To create Kirkwood boot image to be flashed on NAND, > additional parameter u-boot.kwb need to be passed during make. > > Signed-off-by: Prafulla Wadaskar <prafu...@marvell.com> > --- > board/Marvell/rd6281a/config.mk | 3 + > board/Marvell/rd6281a/kwbimage.cfg | 167 > ++++++++++++++++++++++++++++++++++++ > 2 files changed, 170 insertions(+), 0 deletions(-) > create mode 100644 board/Marvell/rd6281a/kwbimage.cfg
Applied to u-boot-marvell master branch Regards.. Prafulla . . _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot