On 09/06/2016 02:24 PM, Masahiro Yamada wrote: > 2016-09-06 10:04 GMT+09:00 Simon Glass <s...@chromium.org>: >> On 30 August 2016 at 03:56, Stefan Roese <s...@denx.de> wrote: >>> On 30.08.2016 11:50, Masahiro Yamada wrote: >>>> >>>> If both SPL_DM and SPL_OF_CONTROL are enabled, SPL needs to bind >>>> several devices, but CONFIG_SYS_MALLOC_F_LEN=0x400 is apparently >>>> not enough. Increase the default to 0x2000 for the case. This >>>> will be helpful for shorter defconfigs. >>>> >>>> Signed-off-by: Masahiro Yamada <yamada.masah...@socionext.com> >>> >>> >>> Reviewed-by: Stefan Roese <s...@denx.de> >> >> Reviewed-by: Simon Glass <s...@chromium.org> >> >> It would be worth checking why. I fixed a bug where simple-bus would >> bring in all devices regardless of the u-boot,dm-pre-reloc flag. >> Perhaps that was it? > > I do not think so. > > Recently I tested this. In spite of "u-boot,dm-pre-reloc" > in the SPL device tree, my board failed in SPL. > > I guess CONFIG_SYS_MALLOC_F_LEN=0x400 is not enough > for binding/probing UART, pinctrl, MMC in SPL. > > I increased the malloc size and it worked fine.
You can check this by tracking the allocations and the utilization of the malloc space. -- Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot