From: Stephen Warren <swar...@nvidia.com>

On Tegra186, the bootloader which runs before U-Boot passes the Ethernet
MAC address to U-Boot using device tree. Extract this value and write it
to the environment, so that the Ethernet uclass picks it up and uses it
for the built-in Ethernet device.

Signed-off-by: Stephen Warren <swar...@nvidia.com>
---
 arch/arm/mach-tegra/tegra186/Makefile        |  1 +
 arch/arm/mach-tegra/tegra186/nvtboot_board.c | 54 ++++++++++++++++++++++++++++
 2 files changed, 55 insertions(+)
 create mode 100644 arch/arm/mach-tegra/tegra186/nvtboot_board.c

diff --git a/arch/arm/mach-tegra/tegra186/Makefile 
b/arch/arm/mach-tegra/tegra186/Makefile
index 033d6005fb44..26bc462930c1 100644
--- a/arch/arm/mach-tegra/tegra186/Makefile
+++ b/arch/arm/mach-tegra/tegra186/Makefile
@@ -3,5 +3,6 @@
 # SPDX-License-Identifier: GPL-2.0
 
 obj-y += ../board186.o
+obj-y += nvtboot_board.o
 obj-y += nvtboot_ll.o
 obj-y += nvtboot_mem.o
diff --git a/arch/arm/mach-tegra/tegra186/nvtboot_board.c 
b/arch/arm/mach-tegra/tegra186/nvtboot_board.c
new file mode 100644
index 000000000000..1d78346f9843
--- /dev/null
+++ b/arch/arm/mach-tegra/tegra186/nvtboot_board.c
@@ -0,0 +1,54 @@
+/*
+ * Copyright (c) 2016, NVIDIA CORPORATION.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <fdt_support.h>
+#include <fdtdec.h>
+#include <asm/arch/tegra.h>
+
+extern unsigned long nvtboot_boot_x0;
+
+/*
+ * Attempt to use /chosen/nvidia,ether-mac in the nvtboot DTB to U-Boot's
+ * ethaddr environment variable if possible.
+ */
+static int set_ethaddr_from_nvtboot(void)
+{
+       const void *nvtboot_blob = (void *)nvtboot_boot_x0;
+       int ret, node, len;
+       const u32 *prop;
+
+       /* Already a valid address in the environment? If so, keep it */
+       if (getenv("ethaddr"))
+               return 0;
+
+       node = fdt_path_offset(nvtboot_blob, "/chosen");
+       if (node < 0) {
+               printf("Can't find /chosen node in nvtboot DTB\n");
+               return node;
+       }
+       prop = fdt_getprop(nvtboot_blob, node, "nvidia,ether-mac", &len);
+       if (!prop) {
+               printf("Can't find nvidia,ether-mac property in nvtboot DTB\n");
+               return -ENOENT;
+       }
+
+       ret = setenv("ethaddr", (void *)prop);
+       if (ret) {
+               printf("Failed to set ethaddr from nvtboot DTB: %d\n", ret);
+               return ret;
+       }
+
+       return 0;
+}
+
+int tegra_soc_board_init_late(void)
+{
+       /* Ignore errors here; not all cases care about Ethernet addresses */
+       set_ethaddr_from_nvtboot();
+
+       return 0;
+}
-- 
2.9.3

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to