Hi,
On 14-09-16 04:26, Chen-Yu Tsai wrote:
Sinlinx SinA33 has 1 USB host port. Enable EHCI_HCD support for it.
Also enable USB mass storage support so we can access USB sticks.
Signed-off-by: Chen-Yu Tsai <w...@csie.org>
---
configs/Sinlinx_SinA33_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/configs/Sinlinx_SinA33_defconfig b/configs/Sinlinx_SinA33_defconfig
index 77eb05bf251a..673f3210a1b5 100644
--- a/configs/Sinlinx_SinA33_defconfig
+++ b/configs/Sinlinx_SinA33_defconfig
@@ -9,4 +9,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-sinlinx-sina33"
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_USB_MASS_STORAGE=y
If we want to enable CONFIG_CMD_USB_MASS_STORAGE on sunxi, we really
should do so on all boards (feel free to submit a patch for this).
e.g. add something like this to board/sunxi/Kconfig:
config CMD_USB_MASS_STORAGE
default y
So that we can still disable it in case there are space constraints,
but normally we enable it on all sunxi boards offering a
consistent set of available comments.
So I've dropped this bit of the patch.
Otherwise this series LGTM:
Reviewed-by: Hans de Goede <hdego...@redhat.com>
I've added this to my local queue and this will go out
with the pull-req I plan todo later today.
Regards,
Hans
# CONFIG_CMD_FPGA is not set
+CONFIG_USB_EHCI_HCD=y
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
