Hi Jagan,
On Sat, Sep 17, 2016 at 02:18:33AM +0530, Jagan Teki wrote:
>snvs base is added only for i.MX6ULL but the code is
>added for common, so firing build error while compiling
>other i.MX6 SOC's
>
>Issue observed with the below patch
>"imx: mx6ull: Update memory map address"
>(sha1: e8eac1b5b3a98a06426bc4867c03c38329841e5c)
>
>Build log:
> CC arch/arm/imx-common/iomux-v3.o
>arch/arm/imx-common/iomux-v3.c: In function 'imx_iomux_v3_setup_pad':
>arch/arm/imx-common/iomux-v3.c:56:19: error: 'IOMUXC_SNVS_BASE_ADDR'
>undeclared (first use in this function)
> base = (void *)IOMUXC_SNVS_BASE_ADDR;
CONFIG_IOMUX_LPSR is only needed for i.MX7 and i.MX6ULL now.
CONFIG_IOMUX_LPSR is defined in your configuration?
I did not meet such build error.
Regards,
Peng.
>
>Cc: Stefano Babic <sba...@denx.de>
>Cc: Peng Fan <van.free...@gmail.com>
>Cc: Michael Trimarchi <mich...@amarulasolutions.com>
>Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
>---
> arch/arm/imx-common/iomux-v3.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
>diff --git a/arch/arm/imx-common/iomux-v3.c b/arch/arm/imx-common/iomux-v3.c
>index 78f667e..efb884c 100644
>--- a/arch/arm/imx-common/iomux-v3.c
>+++ b/arch/arm/imx-common/iomux-v3.c
>@@ -50,7 +50,7 @@ void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
> if (sel_input_ofs)
> sel_input_ofs += IOMUX_LPSR_SEL_INPUT_OFS;
> }
>-#else
>+#elif defined(CONFIG_MX6ULL)
> if (is_mx6ull()) {
> if (lpsr == IOMUX_CONFIG_LPSR) {
> base = (void *)IOMUXC_SNVS_BASE_ADDR;
>--
>2.7.4
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
