Hi Tom, Here is the first sunxi pull-req for v2016.11.
This consists of a couple of small bug-fixes / defconfig improvements + 1 new board. The following changes since commit 8cbb389bb3da80cbf8911f8386cbff92c6a78afe: Prepare v2016.09 (2016-09-12 10:05:51 -0400) are available in the git repository at: http://git.denx.de/u-boot-sunxi.git master for you to fetch changes up to ca7628a91136364235de8fb4bd699944b981c504: sunxi: Enable USB gadget support for Sinlinx SinA33 (2016-09-18 14:39:16 +0200) ---------------------------------------------------------------- Chen-Yu Tsai (4): sunxi: musb: Power off OTG port VBUS when disabled sunxi: Add mmc0 card detect pin for Sinlinx SinA33 sunxi: Enable USB host support for Sinlinx SinA33 sunxi: Enable USB gadget support for Sinlinx SinA33 Hans de Goede (2): sunxi: axp2xx: disable ldoio0/1 at boot sunxi: musb: Re-init musb controller on repeated probe calls Jelle van der Waa (1): sunxi: Add defconfig and dts for the NanoPi NEO arch/arm/dts/Makefile | 3 +- arch/arm/dts/sun8i-h3-nanopi-neo.dts | 125 ++++++++++++++++++++++++++++++ arch/arm/include/asm/arch-sunxi/usb_phy.h | 1 - arch/arm/mach-sunxi/usb_phy.c | 7 -- board/sunxi/MAINTAINERS | 5 ++ configs/Sinlinx_SinA33_defconfig | 10 +++ configs/nanopi_neo_defconfig | 16 ++++ drivers/power/axp209.c | 16 ++++ drivers/power/axp221.c | 12 +++ drivers/usb/musb-new/sunxi.c | 48 ++++++------ 10 files changed, 209 insertions(+), 34 deletions(-) create mode 100644 arch/arm/dts/sun8i-h3-nanopi-neo.dts create mode 100644 configs/nanopi_neo_defconfig Regards, Hans _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
