Hi,
On 19-09-16 16:03, Tom Rini wrote:
Based on A13-OLinuXino, enable DFU and UMS support.
Signed-off-by: Tom Rini <tr...@konsulko.com>
---
With this change I've added DFU to my tests on this board, and assuming a
follow up test with the SD image that kicks the board into FEL works, I'll
then enable the UMS tests on this board (and add DFU to SD, not just DFU to
RAM).
configs/A20-OLinuXino-Lime2_defconfig | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/configs/A20-OLinuXino-Lime2_defconfig
b/configs/A20-OLinuXino-Lime2_defconfig
index 23db07380624..54343de7f351 100644
--- a/configs/A20-OLinuXino-Lime2_defconfig
+++ b/configs/A20-OLinuXino-Lime2_defconfig
@@ -12,9 +12,17 @@
CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)"
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_DFU=y
+CONFIG_CMD_USB_MASS_STORAGE=y
Do you need CMD_USB_MASS_STORAGE for your tests ? Enabling
CMD_USB_MASS_STORAGE really seems orthogonal to enabling GADGET
mode to me, esp. since it is only useful in host mode AFAICT.
Chen-Yu did something similar in a patch enabling host mode for a
different sunxi board and here is what I replied:
"
If we want to enable CONFIG_CMD_USB_MASS_STORAGE on sunxi, we really
should do so on all boards (feel free to submit a patch for this).
e.g. add something like this to board/sunxi/Kconfig:
config CMD_USB_MASS_STORAGE
default y
So that we can still disable it in case there are space constraints,
but normally we enable it on all sunxi boards offering a
consistent set of available commands.
"
The same goes for this patch, otherwise this patch is:
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Ig you want to feel free to apply this directly
(given that I've send out a sunxi pull-req recently).
Regards,
Hans
# CONFIG_CMD_FPGA is not set
CONFIG_RTL8211X_PHY_FORCE_MASTER=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_AXP_ALDO3_VOLT=2800
CONFIG_AXP_ALDO4_VOLT=2800
CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_GADGET=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_G_DNL_MANUFACTURER="Allwinner Technology"
+CONFIG_G_DNL_VENDOR_NUM=0x1f3a
+CONFIG_G_DNL_PRODUCT_NUM=0x1010
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
