Enable the NAND interface on this board.
Signed-off-by: Chris Packham <judge.pack...@gmail.com>
---
Changes in v2: None
arch/arm/dts/armada-385-amc.dts | 8 ++++++++
configs/db-88f6820-amc_defconfig | 2 ++
include/configs/db-88f6820-amc.h | 4 ++++
3 files changed, 14 insertions(+)
diff --git a/arch/arm/dts/armada-385-amc.dts b/arch/arm/dts/armada-385-amc.dts
index 858138a3376b..a5a8a7f186db 100644
--- a/arch/arm/dts/armada-385-amc.dts
+++ b/arch/arm/dts/armada-385-amc.dts
@@ -120,6 +120,14 @@
reg = <0>;
};
};
+
+ flash@d0000 {
+ status = "okay";
+ num-cs = <1>;
+ marvell,nand-keep-config;
+ marvell,nand-enable-arbiter;
+ nand-on-flash-bbt;
+ };
};
pcie-controller {
diff --git a/configs/db-88f6820-amc_defconfig b/configs/db-88f6820-amc_defconfig
index 5784c4566769..18fcf0eb1438 100644
--- a/configs/db-88f6820-amc_defconfig
+++ b/configs/db-88f6820-amc_defconfig
@@ -12,6 +12,7 @@ CONFIG_BOOTDELAY=3
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_NAND=y
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_I2C=y
@@ -28,6 +29,7 @@ CONFIG_CMD_EXT4=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_SPL_OF_TRANSLATE=y
+CONFIG_NAND_PXA3XX=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_MACRONIX=y
diff --git a/include/configs/db-88f6820-amc.h b/include/configs/db-88f6820-amc.h
index 042ded832047..a6d022191eec 100644
--- a/include/configs/db-88f6820-amc.h
+++ b/include/configs/db-88f6820-amc.h
@@ -68,6 +68,10 @@
#define CONFIG_PCI_SCAN_SHOW
#endif
+/* NAND */
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+
#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */
#define CONFIG_SYS_ALT_MEMTEST
--
2.9.2.518.ged577c6.dirty
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
