On Thu, Sep 22, 2016 at 11:48:16AM -0400, Tom Rini wrote: >On Mon, Sep 19, 2016 at 11:55:43AM +0800, van.free...@gmail.com wrote: > >> From: Peng Fan <peng....@nxp.com> >> >> Add plugin code for mx6ullevk. >> Define CONFIG_USE_PLUGIN in include/configs/mx6ullevk.h to use plugin code. >> >> Signed-off-by: Peng Fan <peng....@nxp.com> >> Cc: Stefano Babic <sba...@denx.de> > >So we need an option in arch/arm/cpu/armv7/mx6/Kconfig to offer plugin >support, and 'USE_PLUGIN' is too generic of a name. Perhaps >USE_IMXIMG_PLUGIN ?
Yeah. Will include this only for plugin board code. About host tools, I'll try to make PLUGIN always be there. > >> --- >> board/freescale/mx6ullevk/Makefile | 4 ++ >> board/freescale/mx6ullevk/plugin.S | 139 >> +++++++++++++++++++++++++++++++++++++ >> 2 files changed, 143 insertions(+) >> create mode 100644 board/freescale/mx6ullevk/plugin.S >> >> diff --git a/board/freescale/mx6ullevk/Makefile >> b/board/freescale/mx6ullevk/Makefile >> index c64fba4..0ee905b 100644 >> --- a/board/freescale/mx6ullevk/Makefile >> +++ b/board/freescale/mx6ullevk/Makefile >> @@ -4,3 +4,7 @@ >> # >> >> obj-y := mx6ullevk.o >> + >> +extra-$(CONFIG_USE_PLUGIN) := plugin.bin >> +$(obj)/plugin.bin: $(obj)/plugin.o >> + $(OBJCOPY) -O binary --gap-fill 0xff $< $@ > >And then we can move this logic up a bit higher and say that >$(BOARDDIR)/plugin.S will make $(BOARDDIR)/plugin.bin or so Will add this to arch/arm/imx-common/Makefile. Thanks, Peng. > >Thanks! > >-- >Tom -- _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot