This patch adds device tree support for the bcm2835 GPIO driver.
Signed-off-by: Fabian Vogt <fv...@suse.com>
---
doc/device-tree-bindings/gpio/bcm2835-gpio.txt | 5 +++++
drivers/gpio/bcm2835_gpio.c | 24 ++++++++++++++++++++++++
2 files changed, 29 insertions(+)
create mode 100644 doc/device-tree-bindings/gpio/bcm2835-gpio.txt
diff --git a/doc/device-tree-bindings/gpio/bcm2835-gpio.txt
b/doc/device-tree-bindings/gpio/bcm2835-gpio.txt
new file mode 100644
index 0000000..21e0610
--- /dev/null
+++ b/doc/device-tree-bindings/gpio/bcm2835-gpio.txt
@@ -0,0 +1,5 @@
+* Broadcom BCM283x GPIO controller
+
+Required properties:
+- compatible: must be "brcm,bcm2835-gpio"
+- reg: exactly one register range with length 0xb4
diff --git a/drivers/gpio/bcm2835_gpio.c b/drivers/gpio/bcm2835_gpio.c
index 8dd7a28..cd5480e 100644
--- a/drivers/gpio/bcm2835_gpio.c
+++ b/drivers/gpio/bcm2835_gpio.c
@@ -10,6 +10,7 @@
#include <errno.h>
#include <asm/gpio.h>
#include <asm/io.h>
+#include <fdtdec.h>
struct bcm2835_gpios {
struct bcm2835_gpio_regs *reg;
@@ -118,9 +119,32 @@ static int bcm2835_gpio_probe(struct udevice *dev)
return 0;
}
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+static const struct udevice_id bcm2835_gpio_id[] = {
+ {.compatible = "brcm,bcm2835-gpio"},
+ {}
+};
+
+static int bcm2835_gpio_ofdata_to_platdata(struct udevice *dev)
+{
+ struct bcm2835_gpio_platdata *plat = dev_get_platdata(dev);
+ fdt_addr_t addr;
+
+ addr = dev_get_addr(dev);
+ if (addr == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ plat->base = addr;
+ return 0;
+}
+#endif
+
U_BOOT_DRIVER(gpio_bcm2835) = {
.name = "gpio_bcm2835",
.id = UCLASS_GPIO,
+ .of_match = of_match_ptr(bcm2835_gpio_id),
+ .ofdata_to_platdata = of_match_ptr(bcm2835_gpio_ofdata_to_platdata),
+ .platdata_auto_alloc_size = sizeof(struct bcm2835_gpio_platdata),
.ops = &gpio_bcm2835_ops,
.probe = bcm2835_gpio_probe,
.flags = DM_FLAG_PRE_RELOC,
--
2.6.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
