On Wed, Sep 28, 2016 at 1:28 PM, Jagan Teki <jt...@openedev.com> wrote: > From: Jagan Teki <ja...@amarulasolutions.com> > > Add enet support for engicam icorem6 qdl starter kit. > - Add pinmux settings > - Add board_eth_init > > TFTP log: > -------- > Net: FEC [PRIME] > Hit any key to stop autoboot: 0 > icorem6qdl> tftpboot {fdt_addr} imx6dl-icore.dtb > Using FEC device > TFTP from server 192.168.2.96; our IP address is 192.168.2.75 > Filename 'imx6dl-icore.dtb'. > Load address: 0x0 > Loading: ###### > 1.3 MiB/s > done > Bytes transferred = 28976 (7130 hex) > CACHE: Misaligned operation at range [00000000, 00007130] > icorem6qdl> > > Cc: Joe Hershberger <joe.hershber...@ni.com> > Cc: Peng Fan <peng....@nxp.com> > Cc: Stefano Babic <sba...@denx.de> > Cc: Fabio Estevam <fabio.este...@nxp.com> > Cc: Matteo Lisi <matteo.l...@engicam.com> > Cc: Michael Trimarchi <mich...@amarulasolutions.com> > Signed-off-by: Jagan Teki <ja...@amarulasolutions.com> > --- > board/engicam/icorem6/icorem6.c | 72 > +++++++++++++++++++++++++++++++++++++ > configs/imx6qdl_icore_mmc_defconfig | 4 +++ > include/configs/imx6qdl_icore.h | 12 +++++++ > 3 files changed, 88 insertions(+) >
... > diff --git a/configs/imx6qdl_icore_mmc_defconfig > b/configs/imx6qdl_icore_mmc_defconfig > index a658f4b..d304693 100644 > --- a/configs/imx6qdl_icore_mmc_defconfig > +++ b/configs/imx6qdl_icore_mmc_defconfig > @@ -14,6 +14,8 @@ CONFIG_SYS_MAXARGS=32 > # CONFIG_CMD_IMLS is not set > CONFIG_CMD_BOOTZ=y > CONFIG_CMD_GPIO=y > +CONFIG_CMD_MII=y > +CONFIG_CMD_PING=y > CONFIG_CMD_MEMTEST=y > CONFIG_CMD_MMC=y > CONFIG_CMD_CACHE=y > @@ -23,5 +25,7 @@ CONFIG_CMD_EXT4_WRITE=y > CONFIG_CMD_FAT=y > CONFIG_CMD_FS_GENERIC=y > CONFIG_OF_LIBFDT=y > +CONFIG_FEC_MXC=y > CONFIG_MXC_UART=y > +CONFIG_NETDEVICES=y > CONFIG_IMX_THERMAL=y I guess this board can't use CONFIG_DM_ETH for some reason? _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot