Already tried. The same output: > mmc_load_image_raw_sector: mmc block read error > SPL: failed to boot from all boot devices > ### ERROR ### Please RESET the board ###
> 2 окт. 2016 г., в 19:38, Jagan Teki <jagannadh.t...@gmail.com> написал(а): > > On Sun, Oct 2, 2016 at 1:07 PM, Alexandr Bochkarev > <aneox.in...@gmail.com> wrote: >> Hi! >> >> I am trying to boot my A20 board from eMMC KLM4G1FE3B-B001, but has no >> success. >> Commenting mmc_change_freq has no effect. >> U-Boot 2016.03 just says Could not determine boot source >> >> I have found, that it stucks in sunxi_mmc_has_egon_boot_signature. >> >> int sunxi_mmc_has_egon_boot_signature(struct mmc *mmc) >> { >> char *buf = malloc(512); >> int valid_signature = 0; >> >> if (buf == NULL) >> panic("Failed to allocate memory\n"); >> >> if (mmc_getcd(mmc) && mmc_init(mmc) == 0 && >> mmc->block_dev.block_read(&mmc->block_dev, 16, 1, buf) == 1 && >> strncmp(&buf[4], "eGON.BT0", 8) == 0) >> valid_signature = 1; >> >> free(buf); >> return valid_signature; >> } >> >> mmc_init(mmc) return no errors, seems good, but >> block_read returns 0, seems it cant read emmc. >> >> >> U-Boot 2016.09 says: >> >> mmc_load_image_raw_sector: mmc block read error >> SPL: failed to boot from all boot devices >> ### ERROR ### Please RESET the board ### > > Can you try it on master once? > > -- > Jagan Teki > Free Software Engineer | www.openedev.com > U-Boot, Linux | Upstream Maintainer > Hyderabad, India. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot