CONFIG_SYS_NUM_I2C_ADAPTERS and CONFIG_SYS_I2C_MULTI_NOPROBES are not used in U-Boot, so drop them.
Signed-off-by: Simon Glass <s...@chromium.org> --- README | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/README b/README index 0c90415..614a81c 100644 --- a/README +++ b/README @@ -2326,10 +2326,7 @@ CBFS (Coreboot Filesystem) support additional defines: CONFIG_SYS_NUM_I2C_BUSES - Hold the number of i2c buses you want to use. If you - don't use/have i2c muxes on your i2c bus, this - is equal to CONFIG_SYS_NUM_I2C_ADAPTERS, and you can - omit this define. + Hold the number of i2c buses you want to use. CONFIG_SYS_I2C_DIRECT_BUS define this, if you don't use i2c muxes on your hardware. @@ -2543,7 +2540,7 @@ CBFS (Coreboot Filesystem) support will skip addresses 0x50 and 0x68 on a board with one I2C bus #define CONFIG_I2C_MULTI_BUS - #define CONFIG_SYS_I2C_MULTI_NOPROBES {{0,0x50},{0,0x68},{1,0x54}} + #define CONFIG_SYS_I2C_NOPROBES {{0,0x50},{0,0x68},{1,0x54}} will skip addresses 0x50 and 0x68 on bus 0 and address 0x54 on bus 1 -- 2.8.0.rc3.226.g39d4020 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot