Hello,
On 10/05/2016 06:50 PM, Simon Glass wrote:
Hi Keerthy,
On 5 October 2016 at 05:58, Keerthy <a0393...@ti.com> wrote:
On Monday 19 September 2016 06:29 AM, Simon Glass wrote:
On 15 September 2016 at 05:34, Keerthy <j-keer...@ti.com> wrote:
Add support for gpio regulators. As of now this driver caters
to gpio regulators with one gpio. Supports setting voltage values to gpio
regulators and retrieving the values.
Signed-off-by: Keerthy <j-keer...@ti.com>
---
Changes in v2:
* Added states and voltages as part of plat data to have
a generic state to voltage mapping removing any assumptions.
drivers/power/regulator/Kconfig | 8 ++
drivers/power/regulator/Makefile | 1 +
drivers/power/regulator/gpio-regulator.c | 137
+++++++++++++++++++++++++++++++
include/power/regulator.h | 1 +
4 files changed, 147 insertions(+)
create mode 100644 drivers/power/regulator/gpio-regulator.c
Reviewed-by: Simon Glass <s...@chromium.org>
Simon,
Wanted to know who is pulling this patch.
Looking in patchwork it is assigned to Przemyslaw.
Regards,
Simon
I'm sorry for the silence, I have very limited time for open source at
present, and now it's hard for me to watch the list.
Simon, I will assign it to you in patchwork, since you have already done
the review.
Best regards,
--
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marc...@samsung.com
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
