Signed-off-by: Sergey Kubushyn <k...@koi8.net>
---
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -571,6 +571,16 @@ config CMD_TIME
help
Run commands and summarize execution time.
+config CMD_NAND_BOOTUPDATE
+ bool "Update NAND bootloader on iMX6 and its brethen"
+ depends on ARCH_MX6 && NAND_BOOT && CMD_NAND
+ help
+ Having iMX6 NAND U-Boot image in memory creates all necessary
+ structures and writes those where they belong along with that
+ U-Boot image so system is able to boot off of raw NAND. Kinda
+ like kobs-ng utility but simpler.
+
+
# TODO: rename to CMD_SLEEP
config CMD_MISC
bool "sleep"
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -67,6 +67,7 @@ obj-$(CONFIG_NAND_OMAP_GPMC) += omap_gpmc.o
obj-$(CONFIG_NAND_OMAP_ELM) += omap_elm.o
obj-$(CONFIG_NAND_PLAT) += nand_plat.o
obj-$(CONFIG_NAND_SUNXI) += sunxi_nand.o
+obj-$(CONFIG_CMD_NAND_BOOTUPDATE) += mxs_nand_bootupdate.o
else # minimal SPL drivers
--- a/drivers/mtd/nand/mxs_nand.c
+++ b/drivers/mtd/nand/mxs_nand.c
@@ -26,6 +26,7 @@
#include <asm/imx-common/regs-gpmi.h>
#include <asm/arch/sys_proto.h>
#include <asm/imx-common/dma.h>
+#include <asm/imx-common/mxs_nand.h>
#define MXS_NAND_DMA_DESCRIPTOR_COUNT 4
@@ -150,7 +151,7 @@ static uint32_t mxs_nand_aux_status_offset(void)
return (MXS_NAND_METADATA_SIZE + 0x3) & ~0x3;
}
-static inline uint32_t mxs_nand_get_ecc_strength(uint32_t page_data_size,
+uint32_t mxs_nand_get_ecc_strength(uint32_t page_data_size,
uint32_t page_oob_size)
{
int ecc_strength;
@@ -226,14 +227,14 @@ static inline uint32_t
mxs_nand_get_mark_offset(uint32_t page_data_size,
return block_mark_bit_offset;
}
-static uint32_t mxs_nand_mark_byte_offset(struct mtd_info *mtd)
+uint32_t mxs_nand_mark_byte_offset(struct mtd_info *mtd)
{
uint32_t ecc_strength;
ecc_strength = mxs_nand_get_ecc_strength(mtd->writesize,
mtd->oobsize);
return mxs_nand_get_mark_offset(mtd->writesize, ecc_strength) >> 3;
}
-static uint32_t mxs_nand_mark_bit_offset(struct mtd_info *mtd)
+uint32_t mxs_nand_mark_bit_offset(struct mtd_info *mtd)
{
uint32_t ecc_strength;
ecc_strength = mxs_nand_get_ecc_strength(mtd->writesize,
mtd->oobsize);
--- /dev/null
+++ b/arch/arm/include/asm/imx-common/mxs_nand.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2015 PHYTEC Messtechnik GmbH,
+ * Author: Stefan Christ <s.christ at phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __NAND_MXS_H
+#define __NAND_MXS_H
+
+/*
+ * Functions are definied in drivers/mtd/nand/nand_mxs.c. They are
used to
+ * calculate the ECC Strength, BadBlockMarkerByte and
BadBlockMarkerStartBit
+ * which are placed into the FCB structure. The i.MX6 ROM needs these
+ * parameters to read the firmware from NAND.
+ *
+ * The parameters depends on the pagesize and oobsize of NAND chips and
are
+ * different for each combination. To avoid placing hardcoded values in
the bbu
+ * update handler code, the generic calculation from the driver code is
used.
+ */
+
+uint32_t mxs_nand_get_ecc_strength(uint32_t page_data_size,
+ uint32_t page_oob_size);
+
+uint32_t mxs_nand_mark_byte_offset(struct mtd_info *mtd);
+
+uint32_t mxs_nand_mark_bit_offset(struct mtd_info *mtd);
+
+#endif /* __NAND_MXS_H */
--- /dev/null
+++ b/drivers/mtd/nand/mxs_nand_bootupdate.c
@@ -0,0 +1,556 @@
+/*
+ * mxs_nand_bootupdate.c - write U-Boot to MXS NAND to make it bootable
+ *
+ * Copyright (c) 2016 Sergey Kubushyn <k...@koi8.net>
+ *
+ * Most of the source shamelesly stolen from barebox.
+ *
+ * Here is the original copyright:
+ *
+ *=== Cut ===
+ * Copyright (C) 2014 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation.
+ *=== Cut ===
+ */
+
+
+#include <common.h>
+#include <linux/sizes.h>
+#include <linux/mtd/mtd.h>
+#include <linux/compat.h>
+#include <command.h>
+#include <console.h>
+#include <malloc.h>
+#include <asm/byteorder.h>
+#include <jffs2/jffs2.h>
+#include <nand.h>
+#include <errno.h>
+#include <asm/imx-common/mxs_nand.h>
+#include <asm/imx-common/imximage.cfg>
+
+
+#ifndef CONFIG_CMD_MTDPARTS
+#error "CONFIG_CMD_MTDPARTS is not set, mtd partition support missing"
+#endif
+
+static const char *uboot_tgt = "nand0,0";
+
+/* partition handling routines */
+int mtdparts_init(void);
+int id_parse(const char *id, const char **ret_id, u8 *dev_type, u8
*dev_num);
+int find_dev_and_part(const char *id, struct mtd_device **dev,
+ u8 *part_num, struct part_info **part);
+
+struct dbbt_block {
+ uint32_t Checksum; /* reserved on i.MX6 */
+ uint32_t FingerPrint;
+ uint32_t Version;
+ uint32_t numberBB; /* reserved on i.MX6 */
+ uint32_t DBBTNumOfPages;
+};
+
+struct fcb_block {
+ uint32_t Checksum; /* First fingerprint in first byte */
+ uint32_t FingerPrint; /* 2nd fingerprint at byte 4 */
+ uint32_t Version; /* 3rd fingerprint at byte 8 */
+ uint8_t DataSetup;
+ uint8_t DataHold;
+ uint8_t AddressSetup;
+ uint8_t DSAMPLE_TIME;
+ /* These are for application use only and not for ROM. */
+ uint8_t NandTimingState;
+ uint8_t REA;
+ uint8_t RLOH;
+ uint8_t RHOH;
+ uint32_t PageDataSize; /* 2048 for 2K pages, 4096 for 4K
pages */
+ uint32_t TotalPageSize; /* 2112 for 2K pages, 4314 for 4K
pages */
+ uint32_t SectorsPerBlock; /* Number of 2K sections per block */
+ uint32_t NumberOfNANDs; /* Total Number of NANDs - not used
by ROM */
+ uint32_t TotalInternalDie; /* Number of separate chips in this
NAND */
+ uint32_t CellType; /* MLC or SLC */
+ uint32_t EccBlockNEccType; /* Type of ECC, can be one of
BCH-0-20 */
+ uint32_t EccBlock0Size; /* Number of bytes for Block0 - BCH */
+ uint32_t EccBlockNSize; /* Block size in bytes for all
blocks other than Block0 - BCH */
+ uint32_t EccBlock0EccType; /* Ecc level for Block 0 - BCH */
+ uint32_t MetadataBytes; /* Metadata size - BCH */
+ uint32_t NumEccBlocksPerPage; /* Number of blocks per page for
ROM use - BCH */
+ uint32_t EccBlockNEccLevelSDK; /* Type of ECC, can be one of
BCH-0-20 */
+ uint32_t EccBlock0SizeSDK; /* Number of bytes for Block0 - BCH */
+ uint32_t EccBlockNSizeSDK; /* Block size in bytes for all blocks
other than Block0 - BCH */
+ uint32_t EccBlock0EccLevelSDK; /* Ecc level for Block 0 - BCH */
+ uint32_t NumEccBlocksPerPageSDK;/* Number of blocks per page for
SDK use - BCH */
+ uint32_t MetadataBytesSDK; /* Metadata size - BCH */
+ uint32_t EraseThreshold; /* To set into BCH_MODE register */
+ uint32_t BootPatch; /* 0 for normal boot and 1 to load patch
starting next to FCB */
+ uint32_t PatchSectors; /* Size of patch in sectors */
+ uint32_t Firmware1_startingPage;/* Firmware image starts on this
sector */
+ uint32_t Firmware2_startingPage;/* Secondary FW Image starting
Sector */
+ uint32_t PagesInFirmware1; /* Number of sectors in firmware
image */
+ uint32_t PagesInFirmware2; /* Number of sector in secondary FW
image */
+ uint32_t DBBTSearchAreaStartAddress; /* Page address where dbbt
search area begins */
+ uint32_t BadBlockMarkerByte; /* Byte in page data that have
manufacturer marked bad block marker, */
+ /* this will be swapped with metadata[0] to
complete page data. */
+ uint32_t BadBlockMarkerStartBit;/* For BCH ECC sizes other than 8
and 16 the bad block marker does not */
+ /* start at 0th bit of BadBlockMarkerByte. This
field is used to get to */
+ /* the start bit of bad block marker byte with in
BadBlockMarkerByte */
+ uint32_t BBMarkerPhysicalOffset;/* FCB value that gives byte offset
for bad block marker on physical NAND page */
+ uint32_t BCHType;
+
+ uint32_t TMTiming2_ReadLatency;
+ uint32_t TMTiming2_PreambleDelay;
+ uint32_t TMTiming2_CEDelay;
+ uint32_t TMTiming2_PostambleDelay;
+ uint32_t TMTiming2_CmdAddPause;
+ uint32_t TMTiming2_DataPause;
+ uint32_t TMSpeed;
+ uint32_t TMTiming1_BusyTimeout;
+
+ uint32_t DISBBM; /* the flag to enable (1)/disable(0) bi swap */
+ uint32_t BBMarkerPhysicalOffsetInSpareData; /* The swap position of
main area in spare area */
+};
+
+struct fw_write_data {
+ int fw1_blk;
+ int fw2_blk;
+ int part_blks;
+ void *buf;
+ size_t len;
+};
+
+#define BF_VAL(v, bf) (((v) & bf##_MASK) >> bf##_OFFSET)
+#define GETBIT(v,n) (((v) >> (n)) & 0x1)
+
+
+static uint8_t calculate_parity_13_8(uint8_t d)
+{
+ uint8_t p = 0;
+
+ p |= (GETBIT(d, 6) ^ GETBIT(d, 5) ^ GETBIT(d, 3) ^ GETBIT(d,
2)) << 0;
+ p |= (GETBIT(d, 7) ^ GETBIT(d, 5) ^ GETBIT(d, 4) ^ GETBIT(d, 2) ^
GETBIT(d, 1)) << 1;
+ p |= (GETBIT(d, 7) ^ GETBIT(d, 6) ^ GETBIT(d, 5) ^ GETBIT(d, 1) ^
GETBIT(d, 0)) << 2;
+ p |= (GETBIT(d, 7) ^ GETBIT(d, 4) ^ GETBIT(d, 3) ^ GETBIT(d,
0)) << 3;
+ p |= (GETBIT(d, 6) ^ GETBIT(d, 4) ^ GETBIT(d, 3) ^ GETBIT(d, 2) ^
GETBIT(d, 1) ^ GETBIT(d, 0)) << 4;
+ return p;
+}
+
+static void encode_hamming_13_8(void *_src, void *_ecc, size_t size)
+{
+ int i;
+ uint8_t *src = _src;
+ uint8_t *ecc = _ecc;
+
+ for (i = 0; i < size; i++)
+ ecc[i] = calculate_parity_13_8(src[i]);
+}
+
+static uint32_t calc_chksum(void *buf, size_t size)
+{
+ u32 chksum = 0;
+ u8 *bp = buf;
+ size_t i;
+
+ for (i = 0; i < size; i++)
+ chksum += bp[i];
+
+ return ~chksum;
+}
+
+
+static ssize_t raw_write_page(struct mtd_info *mtd, void *buf, loff_t
offset)
+{
+ struct mtd_oob_ops ops;
+ ssize_t ret;
+
+ ops.mode = MTD_OPS_RAW;
+ ops.ooboffs = 0;
+ ops.datbuf = buf;
+ ops.len = mtd->writesize;
+ ops.oobbuf = buf + mtd->writesize;
+ ops.ooblen = mtd->oobsize;
+ ret = mtd_write_oob(mtd, offset, &ops);
+
+ return ret;
+}
+
+static int fcb_create(struct fcb_block *fcb, struct mtd_info *mtd)
+{
+ fcb->FingerPrint = 0x20424346;
+ fcb->Version = 0x01000000;
+ fcb->PageDataSize = mtd->writesize;
+ fcb->TotalPageSize = mtd->writesize + mtd->oobsize;
+ fcb->SectorsPerBlock = mtd->erasesize / mtd->writesize;
+
+ /* Divide ECC strength by two and save the value into FCB
structure. */
+ fcb->EccBlock0EccType =
+ mxs_nand_get_ecc_strength(mtd->writesize, mtd->oobsize) >> 1;
+
+ fcb->EccBlockNEccType = fcb->EccBlock0EccType;
+
+ /* Also hardcoded in kobs-ng */
+ fcb->EccBlock0Size = 0x00000200;
+ fcb->EccBlockNSize = 0x00000200;
+ fcb->DataSetup = 80;
+ fcb->DataHold = 60;
+ fcb->AddressSetup = 25;
+ fcb->DSAMPLE_TIME = 6;
+ fcb->MetadataBytes = 10;
+
+ /* DBBT search area starts at second page on first block */
+ fcb->DBBTSearchAreaStartAddress = 1;
+
+ fcb->BadBlockMarkerByte = mxs_nand_mark_byte_offset(mtd);
+ fcb->BadBlockMarkerStartBit = mxs_nand_mark_bit_offset(mtd);
+
+ fcb->BBMarkerPhysicalOffset = mtd->writesize;
+
+ fcb->NumEccBlocksPerPage = mtd->writesize / fcb->EccBlock0Size - 1;
+
+ fcb->Checksum = calc_chksum((void *)fcb + 4, sizeof(*fcb) - 4);
+
+ return 0;
+}
+
+/* Erase entire U-Boot partition */
+static int mxs_nand_uboot_erase(struct mtd_info *mtd, struct part_info
*part)
+{
+ uint64_t offset = 0;
+ struct erase_info erase;
+ int len = part->size;
+ int ret;
+
+ while (len > 0) {
+ pr_debug("erasing at 0x%08llx\n", offset);
+ if (mtd_block_isbad(mtd, offset)) {
+ pr_debug("erase skip block @ 0x%08llx\n", offset);
+ offset += mtd->erasesize;
+ continue;
+ }
+
+ memset(&erase, 0, sizeof(erase));
+ erase.addr = offset;
+ erase.len = mtd->erasesize;
+
+ ret = mtd_erase(mtd, &erase);
+ if (ret)
+ return ret;
+
+ offset += mtd->erasesize;
+ len -= mtd->erasesize;
+ }
+
+ return 0;
+}
+
+/* Write the U-Boot proper (2 copies) to where it belongs. */
+/* This is U-Boot binary image itself, no FCB/DBBT here yet. */
+static int mxs_nand_uboot_write_fw(struct mtd_info *mtd, struct
fw_write_data *fw)
+{
+ uint64_t offset;
+ int ret;
+ int blk;
+ size_t dummy;
+ size_t bytes_left;
+ int chunk;
+ void *p;
+
+ bytes_left = fw->len;
+ p = fw->buf;
+ blk = fw->fw1_blk;
+ offset = blk * mtd->erasesize;
+
+ while (bytes_left > 0) {
+ chunk = min(bytes_left, mtd->erasesize);
+
+ pr_debug("fw1: writing %p at 0x%08llx, left 0x%08x\n",
+ p, offset, bytes_left);
+
+ if (mtd_block_isbad(mtd, offset)) {
+ pr_debug("fw1: write skip block @ 0x%08llx\n", offset);
+ offset += mtd->erasesize;
+ blk++;
+ continue;
+ }
+
+ if (blk >= fw->fw2_blk)
+ return -ENOSPC;
+
+ ret = mtd_write(mtd, offset, chunk, &dummy, p);
+ if (ret)
+ return ret;
+
+ offset += chunk;
+ bytes_left -= chunk;
+ p += chunk;
+ blk++;
+ }
+
+ bytes_left = fw->len;
+ p = fw->buf;
+ blk = fw->fw2_blk;
+ offset = blk * mtd->erasesize;
+
+ while (bytes_left > 0) {
+ chunk = min(bytes_left, mtd->erasesize);
+
+ pr_debug("fw2: writing %p at 0x%08llx, left 0x%08x\n",
+ p, offset, bytes_left);
+
+ if (mtd_block_isbad(mtd, offset)) {
+ pr_debug("fw2: write skip block @ 0x%08llx\n", offset);
+ offset += mtd->erasesize;
+ blk++;
+ continue;
+ }
+
+ if (blk >= fw->part_blks)
+ return -ENOSPC;
+
+ ret = mtd_write(mtd, offset, chunk, &dummy, p);
+ if (ret)
+ return ret;
+
+ offset += chunk;
+ bytes_left -= chunk;
+ p += chunk;
+ blk++;
+ }
+
+ return 0;
+}
+
+static int dbbt_data_create(struct mtd_info *mtd, void *buf, int
num_blocks)
+{
+ int n;
+ int n_bad_blocks = 0;
+ uint32_t *bb = buf + 0x8;
+ uint32_t *n_bad_blocksp = buf + 0x4;
+
+ for (n = 0; n < num_blocks; n++) {
+ loff_t offset = n * mtd->erasesize;
+ if (mtd_block_isbad(mtd, offset)) {
+ n_bad_blocks++;
+ *bb = n;
+ bb++;
+ }
+ }
+
+ *n_bad_blocksp = n_bad_blocks;
+
+ return n_bad_blocks;
+}
+
+/********************************************************************/
+/* This is where it is all done. Takes pointer to a U-Boot image in */
+/* RAM and image size, creates FCB/DBBT and writes everything where */
+/* it belongs into NAND. Image must be an IMX image built for NAND. */
+/********************************************************************/
+static int mxs_nand_uboot_update(const void *img, size_t len)
+{
+ int i, ret;
+
+ size_t dummy;
+ loff_t offset = 0;
+
+ void *fcb_raw_page;
+ void *dbbt_page;
+ void *dbbt_data_page;
+ void *ecc;
+
+ uint32_t num_blocks_fcb_dbbt;
+ uint32_t num_blocks_fw;
+
+ struct mtd_info *mtd;
+ struct fcb_block *fcb;
+ struct dbbt_block *dbbt;
+
+ struct mtd_device *dev;
+ struct part_info *part;
+ u8 pnum;
+
+ struct fw_write_data fw;
+
+ if ((mtdparts_init() == 0) &&
+ (find_dev_and_part(uboot_tgt, &dev, &pnum, &part) == 0)) {
+ if (dev->id->type != MTD_DEV_TYPE_NAND) {
+ puts("Not a NAND device\n");
+ return -ENODEV;
+ }
+ }
+
+ nand_curr_device = dev->id->num;
+
+#ifdef CONFIG_SYS_NAND_SELECT_DEVICE
+ board_nand_select_device(nand_info[nand_curr_device].priv,
nand_curr_device);
+#endif
+
+ /* Get a pointer to mtd_info for selected device */
+
+ mtd = get_mtd_device_nm("nand0"); /* We always boot off of nand0 */
+ + if (IS_ERR(mtd)) {
+ /* Should not happen */
+ puts("No nand0 device...\n");
+ return -ENODEV;
+ }
+ + put_mtd_device(mtd);
+
+ /* Quick and dirty check if we have 2Mbytes of good blocks in
nand0,0 */
+ /* Not sure if it is needed at all but won't hurt so here it
is... */
+ + i = 0;
+ offset = 0; /* It is the first partition so it starts at block 0 */
+
+ while (offset < part->size) {
+ if (!mtd_block_isbad(mtd, offset)) {
+ i += mtd->erasesize;
+ }
+ offset += mtd->erasesize;
+ }
+ + if (i < SZ_2M) {
+ puts("Partition too small for U-Boot!\n");
+ return -EINVAL;
+ }
+
+ /* We will use 4 first blocks for FCB/DBBT copies. */
+ /* The rest of partition is split in half and used */
+ /* for two U-Boot copies. We don't care if those */
+ /* start on good or bad block - bad blocks will be */
+ /* skipped on write, ROM boot code will also skip */
+ /* bad blocks on bootup when loading U-Boot image. */
+
+ fw.part_blks = part->size / mtd->erasesize;
+ num_blocks_fcb_dbbt = 4;
+ num_blocks_fw = (fw.part_blks - num_blocks_fcb_dbbt) / 2;
+ fw.fw1_blk = num_blocks_fcb_dbbt;
+ fw.fw2_blk = fw.fw1_blk + num_blocks_fw;
+
+ /* OK, now create FCB structure for bootROM NAND boot */
+
+ fcb_raw_page = kzalloc(mtd->writesize + mtd->oobsize, GFP_KERNEL);
+
+ fcb = fcb_raw_page + 12;
+ ecc = fcb_raw_page + 512 + 12;
+
+ dbbt_page = kzalloc(mtd->writesize, GFP_KERNEL);
+ dbbt_data_page = kzalloc(mtd->writesize, GFP_KERNEL);
+ dbbt = dbbt_page;
+
+ /* Write one additional page to make the ROM happy. */
+ /* Maybe the PagesInFirmwarex fields are really the */
+ /* number of pages - 1. kobs-ng does the same. */
+ + fw.len = ALIGN(len + FLASH_OFFSET_STANDARD + mtd->writesize,
mtd->writesize);
+ fw.buf = kzalloc(fw.len, GFP_KERNEL);
+ memcpy(fw.buf + FLASH_OFFSET_STANDARD, img, len);
+
+ /* Erase entire partition */
+ ret = mxs_nand_uboot_erase(mtd, part);
+ if (ret)
+ goto out;
+
+ /* Now write 2 copies of the U-Boot proper to where they belong. */
+ /* Headers (FCB, DBBT) will be generated and written after that. */
+ ret = mxs_nand_uboot_write_fw(mtd, &fw);
+ if (ret < 0)
+ goto out;
+
+ /* Create FCB, calculate ECC (we don't/can't use hardware ECC */
+ /* here so we do it ourselves and then write _RAW_ pages. */
+ + fcb->Firmware1_startingPage = fw.fw1_blk * mtd->erasesize /
mtd->writesize;
+ fcb->Firmware2_startingPage = fw.fw2_blk * mtd->erasesize /
mtd->writesize;
+ fcb->PagesInFirmware1 =
+ ALIGN(len + FLASH_OFFSET_STANDARD, mtd->writesize) /
mtd->writesize;
+ fcb->PagesInFirmware2 = fcb->PagesInFirmware1;
+
+ fcb_create(fcb, mtd);
+ encode_hamming_13_8(fcb, ecc, 512);
+
+ /*
+ * Set the first and second byte of OOB data to 0xFF, not 0x00. These
+ * bytes are used as the Manufacturers Bad Block Marker (MBBM). Since
+ * the FCB is mostly written to the first page in a block, a scan for
+ * factory bad blocks will detect these blocks as bad, e.g. when
+ * function nand_scan_bbt() is executed to build a new bad block
table.
+ * We will _NOT_ mark a bad block as good -- we skip the bad blocks.
+ */
+ memset(fcb_raw_page + mtd->writesize, 0xff, 2);
+
+ /* Now create DBBT */
+ dbbt->Checksum = 0;
+ dbbt->FingerPrint = 0x54424244;
+ dbbt->Version = 0x01000000;
+
+ if ((ret = dbbt_data_create(mtd, dbbt_data_page, fw.part_blks)) < 0)
+ goto out;
+
+ if (ret > 0)
+ dbbt->DBBTNumOfPages = 1;
+
+ offset = 0;
+
+ if (mtd_block_isbad(mtd, offset)) {
+ puts("Block 0 is bad, NAND unusable\n");
+ ret = -EIO;
+ goto out;
+ }
+
+ /* Write FCB/DBBT to first 4 blocks. Skip bad blocks if any. */
+ /* Less than 4 copies will be written if there were BBs !!! */
+ for (i = 0; i < 4; i++) {
+
+ if (mtd_block_isbad(mtd, offset)) {
+ pr_err("Block %d is bad, skipped\n", i);
+ continue;
+ }
+
+
+ ret = raw_write_page(mtd, fcb_raw_page, mtd->erasesize * i);
+ if (ret)
+ goto out;
+
+ ret = mtd_write(mtd, mtd->erasesize * i + mtd->writesize,
+ mtd->writesize, &dummy, dbbt_page);
+ if (ret)
+ goto out;
+
+ /* DBBTNumOfPages == 0 if no bad blocks */
+ if (dbbt->DBBTNumOfPages > 0) {
+ ret = mtd_write(mtd, mtd->erasesize * i + mtd->writesize * 5,
+ mtd->writesize, &dummy, dbbt_data_page);
+ if (ret)
+ goto out;
+ }
+ }
+
+out:
+ kfree(dbbt_page);
+ kfree(dbbt_data_page);
+ kfree(fcb_raw_page);
+ kfree(fw.buf);
+
+ return ret;
+}
+
+
+int mxs_do_nand_bootupdate(ulong addr, size_t len)
+{
+ /* KSI: Unlock NAND first if it is locked... */
+
+ return mxs_nand_uboot_update((const void *)addr, len);
+}
--- a/cmd/nand.c
+++ b/cmd/nand.c
@@ -38,6 +38,11 @@ int find_dev_and_part(const char *id, struct
mtd_device **dev,
u8 *part_num, struct part_info **part);
#endif
+#ifdef CONFIG_CMD_NAND_BOOTUPDATE
+/* This comes from a separate file in drivers/mtd/nand */
+int mxs_do_nand_bootupdate(ulong addr, size_t len);
+#endif
+
static int nand_dump(struct mtd_info *mtd, ulong off, int only_oob,
int repeat)
{
@@ -372,6 +377,9 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int
argc, char * const argv[])
loff_t off, size, maxsize;
char *cmd, *s;
struct mtd_info *mtd;
+#ifdef CONFIG_CMD_NAND_BOOTUPDATE
+ size_t cnt;
+#endif
#ifdef CONFIG_SYS_NAND_QUIET
int quiet = CONFIG_SYS_NAND_QUIET;
#else
@@ -777,6 +785,48 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int
argc, char * const argv[])
}
#endif
+#ifdef CONFIG_CMD_NAND_BOOTUPDATE
+ if (strncmp(cmd, "bootupdate", 10) == 0) {
+
+ if (argc < 3) {
+ /* All default values */
+ addr = getenv_ulong("fileaddr", 16, 0UL);
+ cnt = getenv_ulong("filesize", 16, 0UL);
+ }
+
+ if (argc == 3) {
+ /* 'addr' only, file size from environment */
+ if ((addr = simple_strtoul(argv[2], NULL, 16)) == 0UL)
+ addr = getenv_ulong("fileaddr", 16, 0UL);
+
+ cnt = getenv_ulong("filesize", 16, 0UL);
+ }
+
+ if (argc > 3) {
+ /* 'addr', 'size', and possibly more */
+ if ((addr = simple_strtoul(argv[2], NULL, 16)) == 0UL)
+ addr = getenv_ulong("fileaddr", 16, 0UL);
+
+ if ((cnt = simple_strtoul(argv[3], NULL, 16)) == 0UL)
+ cnt = getenv_ulong("filesize", 16, 0UL);
+ }
+
+
+ if (addr == 0 || cnt == 0) {
+ puts("Invalid arguments to nand bootupdate!\n");
+ return 1;
+ }
+ + if (mxs_do_nand_bootupdate(addr, cnt)) {
+ puts("NAND bootupdate failed!\n");
+ return 1;
+ }
+
+ puts("NAND bootupdate successful\n");
+ return 0;
+ }
+#endif
+
usage:
return CMD_RET_USAGE;
}
@@ -798,6 +848,17 @@ static char nand_help_text[] =
" 'addr', skipping bad blocks and dropping any pages at the end\n"
" of eraseblocks that contain only 0xFF\n"
#endif
+#ifdef CONFIG_CMD_NAND_BOOTUPDATE
+ "nand bootupdate - [addr] [size]\n"
+ " write U-Boot into NAND in board/SoC specific manner creating
all\n"
+ " required headers and other bits and pieces as required for the\n"
+ " system to be able to boot off of NAND. 'addr' is the address\n"
+ " where U-Boot image has been loaded at, 'size' is its size.\n"
+ " If any of 'addr'/'size' is missing it is taken from
environment\n"
+ " for the last file loaded. U-Boot image must be of a proper
type\n"
+ " for the target platform (only IMX image supported at the
moment)\n"
+ " binary without U-Boot image headers (e.g. u-boot.imx file.)\n"
+#endif
"nand erase[.spread] [clean] off size - erase 'size' bytes "
"from offset 'off'\n"
" With '.spread', erase enough for given file size, otherwise,\n"
---
******************************************************************
* KSI@home KOI8 Net < > The impossible we do immediately. *
* Las Vegas NV, USA < > Miracles require 24-hour notice. *
******************************************************************
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot