Add an sf sub-command named sr-protect which allows the status register
protection method to be changed.
Valid settings are software, hardware, power and otp.
Signed-off-by: George McCollister <george.mccollis...@gmail.com>
---
cmd/sf.c | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/cmd/sf.c b/cmd/sf.c
index 65b117f..1a42bf6 100644
--- a/cmd/sf.c
+++ b/cmd/sf.c
@@ -380,6 +380,30 @@ static int do_spi_protect(int argc, char * const argv[])
return ret == 0 ? 0 : 1;
}
+static int do_spi_sr_protect(int argc, char * const argv[])
+{
+ int ret;
+ enum srp_method method;
+
+ if (argc != 2)
+ return -1;
+
+ if (strcmp(argv[1], "software") == 0)
+ method = SRP_SOFTWARE;
+ else if (strcmp(argv[1], "hardware") == 0)
+ method = SRP_HARDWARE;
+ else if (strcmp(argv[1], "power") == 0)
+ method = SRP_POWER;
+ else if (strcmp(argv[1], "otp") == 0)
+ method = SRP_OTP;
+ else
+ return -1; /* Unknown parameter */
+
+ ret = spi_flash_sr_protect(flash, method);
+
+ return ret == 0 ? 0 : 1;
+}
+
#ifdef CONFIG_CMD_SF_TEST
enum {
STAGE_ERASE,
@@ -574,6 +598,8 @@ static int do_spi_flash(cmd_tbl_t *cmdtp, int flag, int
argc,
ret = do_spi_flash_erase(argc, argv);
else if (strcmp(cmd, "protect") == 0)
ret = do_spi_protect(argc, argv);
+ else if (strcmp(cmd, "sr-protect") == 0)
+ ret = do_spi_sr_protect(argc, argv);
#ifdef CONFIG_CMD_SF_TEST
else if (!strcmp(cmd, "test"))
ret = do_spi_flash_test(argc, argv);
@@ -615,5 +641,7 @@ U_BOOT_CMD(
" or to start of mtd
`partition'\n"
"sf protect lock/unlock sector len - protect/unprotect 'len' bytes
starting\n"
" at address 'sector'\n"
+ "sf sr-protect method - set status register protect
method to\n"
+ " software, hardware, power or
otp\n"
SF_TEST_HELP
);
--
2.9.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
