On Tue, Oct 11, 2016 at 3:15 PM, Otavio Salvador <otavio.salva...@ossystems.com.br> wrote: > On Tue, Oct 11, 2016 at 11:09 AM, Diego Dorta <diego.do...@nxp.com> wrote: >> Add a README to explain the steps for booting mx6sabresd in different ways: >> 1. Booting via Normal U-Boot (u-boot.imx) >> 2. Booting via SPL (SPL and u-boot.img) >> 3. Booting via Falcon mode (SPL launches the kernel directly) >> >> Signed-off-by: Diego Dorta <diego.do...@nxp.com> > > It is not clear if the SPL supports the QDL automatically or not. Also
The README mentions that only mx6qsabresd and mx6qpsabresd are supported. > the Falcon mode uses network boot, why not documenting how to use it > from uSD? Network U-Boot? The README shows how to retrieve the SPL and u-boot.img via DHCP. There are many others possibilities such as retrieving them from SATA, USB stick, SPI NOR, etc. Retrieving from DHCP is just an example. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot