Hi, On 10/25/2016 06:13 AM, Simon Glass wrote: > On 24 October 2016 at 10:24, Sylvain Lesne <le...@alse-fr.com> wrote: >> >> Now that CONFIG_BLK and CONFIG_MMC_OPS are enabled by default with >> CONFIG_DM_MMC, the DWMMC driver on the socfpga platform fails at >> runtime. >> >> This adds the missing fields in the driver declaration. >> >> Signed-off-by: Sylvain Lesne <le...@alse-fr.com>
Applied on u-boot-mmc. Thanks! Best Regards, Jaehoon Chung >> --- >> >> Hi, >> >> I might be missing something, but with the latest master, on a >> socfpga board, I get the following failure: >> >> U-Boot SPL 2016.11-rc2-00072-g869588d-dirty (Oct 24 2016 - 17:18:22) >> drivers/ddr/altera/sequencer.c: Preparing to start memory calibration >> drivers/ddr/altera/sequencer.c: CALIBRATION PASSED >> drivers/ddr/altera/sequencer.c: Calibration complete >> Trying to boot from MMC1 >> spl: partition error >> MMC: block number 0xx exceeds max(0xx) >> mmc_load_image_raw_sector: mmc block read error >> SPL: failed to boot from all boot devices >> ### ERROR ### Please RESET the board ### >> >> After some digging, it seems that the socfpga_dw_mmc driver slipped >> through the cracks during some steps of the DM conversion, so I >> added the missing fields of the driver declaration, mimicking what's >> done in the other dw_mmc_* drivers, and it works on my board. >> >> (Also, this is kind of unrelated, but it looks like the error >> message 'MMC: block number 0xx exceeds max(0xx)' has a formatting >> issue!) >> >> --- >> drivers/mmc/socfpga_dw_mmc.c | 2 ++ >> 1 file changed, 2 insertions(+) > > > Reviewed-by: Simon Glass <s...@chromium.org> > > The formatting issue may be due to tiny-printf. > > - Simon > > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot