Hi Simon,
> On Tue, 29 Sep 2009 17:16:42 +0200 > Dieter Kiermaier <dk-arm-li...@gmx.de> wrote: > > > Hm, it looks like there is the whole nand system somewhat broken :( > > Haven't seen it earlier, but: > > U-Boot 2009.08-00208-g9ef0569-dirty (Sep 29 2009 - 15:42:42) > > OpenRD_base > > > > SoC: Kirkwood 88F6281_A0 > > DRAM: 27535155593740288 MB > > NAND: 0 MiB > > *** Warning - bad CRC or NAND, using default environment > > > > But boot message state that there is no NAND detected! > > So I assume that is the main cause for the not working saveenv command? > > Cross checked it with marvell provided u-boot - this one works. So damaged > > hardware isn't the case. > > It's a EABI problem, see this thread: > > http://lists.denx.de/pipermail/u-boot/2009-September/059896.html > > (and the other one referred from here). We don't have a good solution > yet, but you have a hacky patch to revert to the old ABI at the end of > the thread above. > Many thanks for the link, but now I've got other strange errors during u-boot compile: arm-none-linux-gnueabi-ld: ERROR: Source object /home/dieter/ArtistaNET-III/Software/trunk/SDK/tools/gcc/bin/../lib/gcc/arm-none-linux-gnueabi/4.2.0/libgcc.a(_udivsi3.o) has EABI version 4, but target u-boot has EABI version 0 arm-none-linux-gnueabi-ld: failed to merge target specific data of file /home/dieter/ArtistaNET-III/Software/trunk/SDK/tools/gcc/bin/../lib/gcc/arm-none-linux-gnueabi/4.2.0/libgcc.a(_udivsi3.o) arm-none-linux-gnueabi-ld: ERROR: Source object /home/dieter/ArtistaNET-III/Software/trunk/SDK/tools/gcc/bin/../lib/gcc/arm-none-linux-gnueabi/4.2.0/libgcc.a(_divsi3.o) has EABI version 4, but target u-boot has EABI version 0 arm-none-linux-gnueabi-ld: failed to merge target specific data of file /home/dieter/ArtistaNET-III/Software/trunk/SDK/tools/gcc/bin/../lib/gcc/arm-none-linux-gnueabi/4.2.0/libgcc.a(_divsi3.o) arm-none-linux-gnueabi-ld: ERROR: Source object /home/dieter/ArtistaNET-III/Software/trunk/SDK/tools/gcc/bin/../lib/gcc/arm-none-linux-gnueabi/4.2.0/libgcc.a(_umodsi3.o) has EABI version 4, but target u-boot has EABI version 0 arm-none-linux-gnueabi-ld: failed to merge target specific data of file /home/dieter/ArtistaNET-III/Software/trunk/SDK/tools/gcc/bin/../lib/gcc/arm-none-linux-gnueabi/4.2.0/libgcc.a(_umodsi3.o) arm-none-linux-gnueabi-ld: ERROR: Source object /home/dieter/ArtistaNET-III/Software/trunk/SDK/tools/gcc/bin/../lib/gcc/arm-none-linux-gnueabi/4.2.0/libgcc.a(_modsi3.o) has EABI version 4, but target u-boot has EABI version 0 arm-none-linux-gnueabi-ld: failed to merge target specific data of file /home/dieter/ArtistaNET-III/Software/trunk/SDK/tools/gcc/bin/../lib/gcc/arm-none-linux-gnueabi/4.2.0/libgcc.a(_modsi3.o) arm-none-linux-gnueabi-ld: ERROR: Source object /home/dieter/ArtistaNET-III/Software/trunk/SDK/tools/gcc/bin/../lib/gcc/arm-none-linux-gnueabi/4.2.0/libgcc.a(_lshrdi3.o) has EABI version 4, but target u-boot has EABI version 0 arm-none-linux-gnueabi-ld: failed to merge target specific data of file /home/dieter/ArtistaNET-III/Software/trunk/SDK/tools/gcc/bin/../lib/gcc/arm-none-linux-gnueabi/4.2.0/libgcc.a(_lshrdi3.o) arm-none-linux-gnueabi-ld: ERROR: Source object /home/dieter/ArtistaNET-III/Software/trunk/SDK/tools/gcc/bin/../lib/gcc/arm-none-linux-gnueabi/4.2.0/libgcc.a(_ashrdi3.o) has EABI version 4, but target u-boot has EABI version 0 arm-none-linux-gnueabi-ld: failed to merge target specific data of file /home/dieter/ArtistaNET-III/Software/trunk/SDK/tools/gcc/bin/../lib/gcc/arm-none-linux-gnueabi/4.2.0/libgcc.a(_ashrdi3.o) arm-none-linux-gnueabi-ld: ERROR: Source object /home/dieter/ArtistaNET-III/Software/trunk/SDK/tools/gcc/bin/../lib/gcc/arm-none-linux-gnueabi/4.2.0/libgcc.a(_ashldi3.o) has EABI version 4, but target u-boot has EABI version 0 arm-none-linux-gnueabi-ld: failed to merge target specific data of file /home/dieter/ArtistaNET-III/Software/trunk/SDK/tools/gcc/bin/../lib/gcc/arm-none-linux-gnueabi/4.2.0/libgcc.a(_ashldi3.o) arm-none-linux-gnueabi-ld: ERROR: Source object /home/dieter/ArtistaNET-III/Software/trunk/SDK/tools/gcc/bin/../lib/gcc/arm-none-linux-gnueabi/4.2.0/libgcc.a(_dvmd_lnx.o) has EABI version 4, but target u-boot has EABI version 0 arm-none-linux-gnueabi-ld: failed to merge target specific data of file /home/dieter/ArtistaNET-III/Software/trunk/SDK/tools/gcc/bin/../lib/gcc/arm-none-linux-gnueabi/4.2.0/libgcc.a(_dvmd_lnx.o) make: *** [u-boot] Fehler 1 die...@dk1-linux:~/git/u-boot-marvell$ I use following precompiled toolchain from marvell: die...@dk1-linux:~/git/u-boot-gw.git$ /home/dieter/ArtistaNET-III/Software/trunk/SDK/tools/gcc/bin/arm-none-linux-gnueabi-gcc --version arm-none-linux-gnueabi-gcc (GCC) 4.2.0 20070413 (prerelease) Copyright (C) 2007 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Do you know how I can solve this problem? (I've read the two given mail threads but found no hint to this problem, so maybe my toolchain is broken?) Many thanks, Dieter > > We still haven't found out what's actually causing this. EABI itself > should be fine since Linux works well with it, but something is causing > problems with multiple versions of GCC for U-boot. For now you can use > the patch referred to above. For me, saveenv works fine on OpenRD, so > it should be OK for you as well :-) > > // Simon > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot