On 11/01/2016 07:04 AM, Max Krummenacher wrote:
> The ipu has two display interfaces. Make the used one a parameter
> in struct display_info_t instead of using unconditionally DI0.
> DI0 is the default setting.
>
> Signed-off-by: Max Krummenacher <max.krummenac...@toradex.com>
>
> ---
>
> Changes in v2:
> - none
>
> arch/arm/imx-common/video.c | 2 +-
> arch/arm/include/asm/imx-common/video.h | 1 +
> 2 files changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/imx-common/video.c b/arch/arm/imx-common/video.c
> index fdc987f..549bf9d 100644
> --- a/arch/arm/imx-common/video.c
> +++ b/arch/arm/imx-common/video.c
> @@ -34,7 +34,7 @@ int board_video_skip(void)
> }
>
> if (i < display_count) {
> - ret = ipuv3_fb_init(&displays[i].mode, 0,
> + ret = ipuv3_fb_init(&displays[i].mode, displays[i].di ? 1 : 0,
> displays[i].pixfmt);
> if (!ret) {
> if (displays[i].enable)
> diff --git a/arch/arm/include/asm/imx-common/video.h
> b/arch/arm/include/asm/imx-common/video.h
> index cad5f86..941a031 100644
> --- a/arch/arm/include/asm/imx-common/video.h
> +++ b/arch/arm/include/asm/imx-common/video.h
> @@ -12,6 +12,7 @@ struct display_info_t {
> int bus;
> int addr;
> int pixfmt;
> + int di;
> int (*detect)(struct display_info_t const *dev);
> void (*enable)(struct display_info_t const *dev);
> struct fb_videomode mode;
>
Reviewed-by: Eric Nelson <e...@nelint.com>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
