Hi Stefano, On Sun, Oct 30, 2016 at 1:14 AM, Jagan Teki <ja...@openedev.com> wrote: > From: Jagan Teki <ja...@amarulasolutions.com> > > Config file names on MAINTAINERS and README in > board/engicam/icorem6 seems to be wrong, hence fixed the same. > > Cc: Stefano Babic <sba...@denx.de> > Cc: Michael Trimarchi <mich...@amarulasolutions.com> > Signed-off-by: Jagan Teki <ja...@amarulasolutions.com> > --- > board/engicam/icorem6/MAINTAINERS | 5 +++-- > board/engicam/icorem6/README | 2 +- > 2 files changed, 4 insertions(+), 3 deletions(-) > > diff --git a/board/engicam/icorem6/MAINTAINERS > b/board/engicam/icorem6/MAINTAINERS > index 3e06c6b..a425afb 100644 > --- a/board/engicam/icorem6/MAINTAINERS > +++ b/board/engicam/icorem6/MAINTAINERS > @@ -2,5 +2,6 @@ ICOREM6QDL BOARD > M: Jagan Teki <ja...@amarulasolutions.com> > S: Maintained > F: board/engicam/icorem6 > -F: include/configs/icorem6qdl.h > -F: configs/icorem6qdl_defconfig > +F: include/configs/imx6qdl_icore.h > +F: configs/imx6qdl_icore_mmc_defconfig > +F: configs/imx6qdl_icore_nand_defconfig > diff --git a/board/engicam/icorem6/README b/board/engicam/icorem6/README > index 12d1e21..e47f85f 100644 > --- a/board/engicam/icorem6/README > +++ b/board/engicam/icorem6/README > @@ -4,7 +4,7 @@ How to use U-Boot on Engicam i.CoreM6 DualLite/Solo and > Quad/Dual Starter Kit: > - Configure U-Boot for Engicam i.CoreM6 QDL: > > $ make mrproper > -$ make icorem6qdl_mmc_defconfig > +$ make imx6qdl_icore_mmc_defconfig > > - Build for i.CoreM6 DualLite/Solo
Are you planning to take this? may be I can take it along with my PR. Please let me know if you're OK? thanks! -- Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
