Paulraj, Sandeep wrote: > <snip>
> >>> + >>> +/* SoC Configuration */ >>> +#define CONFIG_ARM926EJS /* arm926ejs CPU */ >>> +#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 >>> */ >> Is there a logical register #define you could use instead of the magic >> number? > > I can include the hardware.h and get the value from there, but the way the > hardware.h for DaVinci has evolved over the years, including it in the config > will result in compilation failure. > I'll add this to my TODO list and send in a patch to clean up for all DaVinci > SOC's the moment I get some free cycles. > That is fine. >>> + >>> +/* I2C Configuration */ >>> +#define CONFIG_HARD_I2C >>> +#define CONFIG_DRIVER_DAVINCI_I2C >>> +#define CONFIG_SYS_I2C_SPEED 80000 >> This speed is unusual. > > The same speed has been used with a slightly older version of U-boot and has > worked fine > >> davinci_sonata.h has a comment that it had a silicon bug with 100k >> Could the same comment be applied here ? > > I don't believe so Ok fine as-is. Tom _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot