Hi Sebastian,
On 16/11/2016 21:02, Sebastian Andrzej Siewior wrote:
> MX7D_PAD_ENET1_RX_CLK__ENET1_RX_CLK is in its currently RGMII_RXC.
> Fix this by providing RX_CLK with properly setting the DAISY value and
> MX7D_PAD_ENET1_RX_CLK__ENET1_RGMII_RXC which did the "previous" setting.
> There should be no fallout because there no in tree users of
> MX7D_PAD_ENET1_RX_CLK__ENET1_RX_CLK.
>
Right - I do not see any use case, and we do not break any board.
> Signed-off-by: Sebastian Andrzej Siewior <bige...@linutronix.de>
> ---
> arch/arm/dts/imx7d-pinfunc.h | 3 ++-
> arch/arm/include/asm/arch-mx7/mx7d_pins.h | 3 ++-
> 2 files changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/dts/imx7d-pinfunc.h b/arch/arm/dts/imx7d-pinfunc.h
> index 32d2464b417d..7bc1dee0f7ff 100644
> --- a/arch/arm/dts/imx7d-pinfunc.h
> +++ b/arch/arm/dts/imx7d-pinfunc.h
> @@ -1123,7 +1123,8 @@
> #define MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12 0x025C
> 0x04CC 0x0000 0x5 0x0
> #define MX7D_PAD_ENET1_TX_CLK__CCM_EXT_CLK1 0x025C
> 0x04CC 0x04E4 0x6 0x2
> #define MX7D_PAD_ENET1_TX_CLK__CSU_ALARM_AUT0 0x025C
> 0x04CC 0x0000 0x7 0x0
> -#define MX7D_PAD_ENET1_RX_CLK__ENET1_RX_CLK 0x0260
> 0x04D0 0x056C 0x0 0x0
> +#define MX7D_PAD_ENET1_RX_CLK__ENET1_RGMII_RXC 0x0260
> 0x04D0 0x056C 0x0 0x0
> +#define MX7D_PAD_ENET1_RX_CLK__ENET1_RX_CLK 0x0260
> 0x04D0 0x056C 0x0 0x1
> #define MX7D_PAD_ENET1_RX_CLK__WDOG2_WDOG_B 0x0260
> 0x04D0 0x0000 0x1 0x0
> #define MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x0260
> 0x04D0 0x06A8 0x2 0x1
> #define MX7D_PAD_ENET1_RX_CLK__GPT2_CLK 0x0260
> 0x04D0 0x0000 0x3 0x0
> diff --git a/arch/arm/include/asm/arch-mx7/mx7d_pins.h
> b/arch/arm/include/asm/arch-mx7/mx7d_pins.h
> index 0ab1246de852..55375f5aa0dc 100644
> --- a/arch/arm/include/asm/arch-mx7/mx7d_pins.h
> +++ b/arch/arm/include/asm/arch-mx7/mx7d_pins.h
> @@ -1278,7 +1278,8 @@ enum {
> MX7D_PAD_ENET1_TX_CLK__CCM_EXT_CLK1 =
> IOMUX_PAD(0x04CC, 0x025C, 6, 0x04E4, 2, 0),
> MX7D_PAD_ENET1_TX_CLK__CSU_ALARM_AUT0 =
> IOMUX_PAD(0x04CC, 0x025C, 7, 0x0000, 0, 0),
>
> - MX7D_PAD_ENET1_RX_CLK__ENET1_RX_CLK =
> IOMUX_PAD(0x04D0, 0x0260, 0, 0x056C, 0, 0),
> + MX7D_PAD_ENET1_RX_CLK__ENET1_RGMII_RXC =
> IOMUX_PAD(0x04D0, 0x0260, 0, 0x056C, 0, 0),
> + MX7D_PAD_ENET1_RX_CLK__ENET1_RX_CLK =
> IOMUX_PAD(0x04D0, 0x0260, 0, 0x056C, 1, 0),
> MX7D_PAD_ENET1_RX_CLK__WDOG2_WDOG_B =
> IOMUX_PAD(0x04D0, 0x0260, 1, 0x0000, 0, 0),
> MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK =
> IOMUX_PAD(0x04D0, 0x0260, 2, 0x06A8, 1, 0),
> MX7D_PAD_ENET1_RX_CLK__GPT2_CLK =
> IOMUX_PAD(0x04D0, 0x0260, 3, 0x0000, 0, 0),
>
Acked-by: Stefano Babic <sba...@denx.de>
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=====================================================================
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
