Hi Kever, On 15 November 2016 at 01:30, Kever Yang <kever.y...@rock-chips.com> wrote: > Hi Simon, > > On 11/12/2016 12:17 AM, Simon Glass wrote: >> >> Hi Kever, >> >> On 9 November 2016 at 00:30, Kever Yang <kever.y...@rock-chips.com> wrote: >>> >>> Enable the usb host port 5V power by enable the fix regulator. >>> The PopMetal board have a on board FE1.1 usb 2.0 hub which connect to >>> the usb host port, we need to de-assert its reset pin at the same time. >> >> This should go in a USB driver. > > > This patch 1)enable the 5V vbus power and 2)de-assert the hub reset pin, > 1) may go to USB driver, but 2) still need to be in board init because that > is > totally board specific.
What is board-specific about it? Are those differences described in the device tree? Regards, Simon [...] _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot