From: Konstantin Porotchkin <kos...@marvell.com>
Add support for mvebu bubt command for flash image
load, check and burn on boot device.
Change-Id: If2b971069ae44232761b601bbbcf0162567f5603
Signed-off-by: Konstantin Porotchkin <kos...@marvell.com>
Cc: Stefan Roese <s...@denx.de>
Cc: Nadav Haklai <nad...@marvell.com>
Cc: Neta Zur Hershkovits <n...@marvell.com>
Cc: Omri Itach <om...@marvell.com>
Cc: Igal Liberman <ig...@marvell.com>
Cc: Haim Boot <ha...@marvell.com>
Cc: Hanna Hawa <han...@marvell.com>
---
arch/arm/mach-mvebu/Kconfig | 30 ++
cmd/Kconfig | 3 +
cmd/Makefile | 2 +
cmd/mvebu/Kconfig | 10 +
cmd/mvebu/Makefile | 19 ++
cmd/mvebu/bubt.c | 699 ++++++++++++++++++++++++++++++++++++++++++++
6 files changed, 763 insertions(+)
create mode 100644 cmd/mvebu/Kconfig
create mode 100644 cmd/mvebu/Makefile
create mode 100644 cmd/mvebu/bubt.c
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 7248fd7..6de85d5 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -99,6 +99,36 @@ config TARGET_THEADORABLE
endchoice
+choice
+ prompt "Flash for image"
+ default MVEBU_SPI_BOOT
+ depends on (TARGET_MVEBU_DB_88F3720 || TARGET_MVEBU_ARMADA_8K)
+
+config MVEBU_NAND_BOOT
+ bool "NAND flash boot"
+ depends on NAND_PXA3XX
+ help
+ Enable boot from NAND
+
+config MVEBU_SPI_BOOT
+ bool "SPI flash boot"
+ depends on SPI_FLASH
+
+config MVEBU_MMC_BOOT
+ bool "eMMC flash boot"
+ depends on MVEBU_MMC
+ help
+ Enable boot from eMMC boot partition
+
+endchoice
+
+config MVEBU_UBOOT_DFLT_NAME
+ string "Default image name for bubt command"
+ default "flash-image.bin"
+ help
+ This option should contain a default file name to be used with
+ MVEBU "bubt" command if the source file name is omitted
+
config SYS_BOARD
default "clearfog" if TARGET_CLEARFOG
default "mvebu_db-88f3720" if TARGET_MVEBU_DB_88F3720
diff --git a/cmd/Kconfig b/cmd/Kconfig
index e339d86..39dd0a0 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -610,6 +610,9 @@ config CMD_QFW
This provides access to the QEMU firmware interface. The main
feature is to allow easy loading of files passed to qemu-system
via -kernel / -initrd
+
+source "cmd/mvebu/Kconfig"
+
endmenu
config CMD_BOOTSTAGE
diff --git a/cmd/Makefile b/cmd/Makefile
index 9c9a9d1..34bc544 100644
--- a/cmd/Makefile
+++ b/cmd/Makefile
@@ -163,3 +163,5 @@ obj-$(CONFIG_CMD_BLOB) += blob.o
# core command
obj-y += nvedit.o
+
+obj-$(CONFIG_ARCH_MVEBU) += mvebu/
diff --git a/cmd/mvebu/Kconfig b/cmd/mvebu/Kconfig
new file mode 100644
index 0000000..e7fbd20
--- /dev/null
+++ b/cmd/mvebu/Kconfig
@@ -0,0 +1,10 @@
+menu "MVEBU commands"
+depends on ARCH_MVEBU
+
+config CMD_MVEBU_BUBT
+ bool "bubt"
+ default n
+ help
+ bubt - Burn a u-boot image to flash
+
+endmenu
diff --git a/cmd/mvebu/Makefile b/cmd/mvebu/Makefile
new file mode 100644
index 0000000..b0817e3
--- /dev/null
+++ b/cmd/mvebu/Makefile
@@ -0,0 +1,19 @@
+#
+# ***************************************************************************
+# Copyright (C) 2015 Marvell International Ltd.
+# ***************************************************************************
+# This program is free software: you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the Free
+# Software Foundation, either version 2 of the License, or any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+# ***************************************************************************
+#
+
+obj-$(CONFIG_CMD_MVEBU_BUBT) += bubt.o
diff --git a/cmd/mvebu/bubt.c b/cmd/mvebu/bubt.c
new file mode 100644
index 0000000..6539063
--- /dev/null
+++ b/cmd/mvebu/bubt.c
@@ -0,0 +1,699 @@
+/*
+ * ***************************************************************************
+ * Copyright (C) 2015 Marvell International Ltd.
+ * ***************************************************************************
+ * This program is free software: you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, either version 2 of the License, or any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ * ***************************************************************************
+ */
+
+#include <config.h>
+#include <common.h>
+#include <command.h>
+#include <vsprintf.h>
+#include <errno.h>
+#include <dm.h>
+
+#include <spi_flash.h>
+#include <spi.h>
+#include <nand.h>
+#include <usb.h>
+#include <fs.h>
+#include <mmc.h>
+#include <u-boot/sha1.h>
+#include <u-boot/sha256.h>
+
+#if defined(CONFIG_TARGET_MVEBU_ARMADA_8K)
+#define MAIN_HDR_MAGIC 0xB105B002
+
+struct mvebu_image_header {
+ uint32_t magic; /* 0-3 */
+ uint32_t prolog_size; /* 4-7 */
+ uint32_t prolog_checksum; /* 8-11 */
+ uint32_t boot_image_size; /* 12-15 */
+ uint32_t boot_image_checksum; /* 16-19 */
+ uint32_t rsrvd0; /* 20-23 */
+ uint32_t load_addr; /* 24-27 */
+ uint32_t exec_addr; /* 28-31 */
+ uint8_t uart_cfg; /* 32 */
+ uint8_t baudrate; /* 33 */
+ uint8_t ext_count; /* 34 */
+ uint8_t aux_flags; /* 35 */
+ uint32_t io_arg_0; /* 36-39 */
+ uint32_t io_arg_1; /* 40-43 */
+ uint32_t io_arg_2; /* 43-47 */
+ uint32_t io_arg_3; /* 48-51 */
+ uint32_t rsrvd1; /* 52-55 */
+ uint32_t rsrvd2; /* 56-59 */
+ uint32_t rsrvd3; /* 60-63 */
+};
+#elif defined(CONFIG_TARGET_MVEBU_DB_88F3720) /* A3700 */
+#define HASH_SUM_LEN 16
+#define IMAGE_VERSION_3_6_0 0x030600
+#define IMAGE_VERSION_3_5_0 0x030500
+
+struct common_tim_data {
+ u32 version;
+ u32 identifier;
+ u32 trusted;
+ u32 issue_date;
+ u32 oem_unique_id;
+ u32 reserved[5]; /* Reserve 20 bytes */
+ u32 boot_flash_sign;
+ u32 num_images;
+ u32 num_keys;
+ u32 size_of_reserved;
+};
+
+struct mvebu_image_info {
+ u32 image_id;
+ u32 next_image_id;
+ u32 flash_entry_addr;
+ u32 load_addr;
+ u32 image_size;
+ u32 image_size_to_hash;
+ u32 hash_algorithm_id;
+ u32 hash[HASH_SUM_LEN]; /* Reserve 512 bits for the
hash */
+ u32 partition_number;
+ u32 enc_algorithm_id;
+ u32 encrypt_start_offset;
+ u32 encrypt_size;
+};
+#endif
+
+struct bubt_dev {
+ char name[8];
+ size_t (*read)(const char *file_name);
+ int (*write)(size_t image_size);
+ int (*active)(void);
+};
+
+static ulong get_load_addr(void)
+{
+ const char *addr_str;
+ unsigned long addr;
+
+ addr_str = getenv("loadaddr");
+ if (addr_str != NULL)
+ addr = simple_strtoul(addr_str, NULL, 16);
+ else
+ addr = CONFIG_SYS_LOAD_ADDR;
+
+ return addr;
+}
+
+/********************************************************************
+ * eMMC services
+ ********************************************************************/
+#ifdef CONFIG_DM_MMC
+static int mmc_burn_image(size_t image_size)
+{
+ struct mmc *mmc;
+ lbaint_t start_lba;
+ lbaint_t blk_count;
+ ulong blk_written;
+#ifdef CONFIG_SYS_MMC_ENV_DEV
+ const u8 mmc_dev_num = CONFIG_SYS_MMC_ENV_DEV;
+#else
+ const u8 mmc_dev_num = 0;
+#endif
+
+ mmc = find_mmc_device(mmc_dev_num);
+ if (!mmc) {
+ printf("No SD/MMC/eMMC card found\n");
+ return 1;
+ }
+
+ if (mmc_init(mmc)) {
+ printf("%s(%d) init failed\n", IS_SD(mmc) ? "SD" : "MMC",
mmc_dev_num);
+ return 1;
+ }
+
+#ifdef CONFIG_SYS_MMC_ENV_PART
+ if (CONFIG_SYS_MMC_ENV_PART != mmc->part_num) {
+ if (mmc_switch_part(mmc_dev_num, CONFIG_SYS_MMC_ENV_PART)) {
+ printf("MMC partition switch failed\n");
+ return 1;
+ }
+ }
+#endif
+
+ /* SD reserves LBA-0 for MBR and boots from LBA-1, MMC/eMMC boots from
LBA-0 */
+ start_lba = IS_SD(mmc) ? 1 : 0;
+ blk_count = image_size / mmc->block_dev.blksz;
+ if (image_size % mmc->block_dev.blksz)
+ blk_count += 1;
+
+ blk_written = mmc->block_dev.block_write(mmc_dev_num,
+ start_lba, blk_count, (void
*)get_load_addr());
+ if (blk_written != blk_count) {
+ printf("Error - written %#lx blocks\n", blk_written);
+ return 1;
+ } else {
+ printf("Done!\n");
+ }
+
+#ifdef CONFIG_SYS_MMC_ENV_PART
+ if (CONFIG_SYS_MMC_ENV_PART != mmc->part_num)
+ mmc_switch_part(mmc_dev_num, mmc->part_num);
+#endif
+
+ return 0;
+}
+
+static size_t mmc_read_file(const char *file_name)
+{
+ loff_t act_read = 0;
+ int rc;
+ struct mmc *mmc;
+#ifdef CONFIG_SYS_MMC_ENV_DEV
+ const u8 mmc_dev_num = CONFIG_SYS_MMC_ENV_DEV;
+#else
+ const u8 mmc_dev_num = 0;
+#endif
+
+ mmc = find_mmc_device(mmc_dev_num);
+ if (!mmc) {
+ printf("No SD/MMC/eMMC card found\n");
+ return 0;
+ }
+
+ if (mmc_init(mmc)) {
+ printf("%s(%d) init failed\n", IS_SD(mmc) ? "SD" : "MMC",
mmc_dev_num);
+ return 0;
+ }
+
+ /* Load from data partition (0) */
+ if (fs_set_blk_dev("mmc", "0", FS_TYPE_ANY)) {
+ printf("Error: MMC 0 not found\n");
+ return 0;
+ }
+
+ /* Perfrom file read */
+ rc = fs_read(file_name, get_load_addr(), 0, 0, &act_read);
+ if (rc)
+ return 0;
+
+ return act_read;
+}
+
+int is_mmc_active(void)
+{
+ return 1;
+}
+#else /* CONFIG_DM_MMC */
+#define mmc_burn_image 0
+#define mmc_read_file 0
+#define is_mmc_active 0
+#endif /* CONFIG_DM_MMC */
+
+
+/********************************************************************
+ * SPI services
+ ********************************************************************/
+#ifdef CONFIG_SPI_FLASH
+static int spi_burn_image(size_t image_size)
+{
+ int ret;
+ struct spi_flash *flash;
+ uint32_t erase_bytes;
+
+ /* Probe the SPI bus to get the flash device */
+ flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
+ CONFIG_SF_DEFAULT_SPEED,
CONFIG_SF_DEFAULT_MODE);
+ if (!flash) {
+ printf("Failed to probe SPI Flash\n");
+ return 1;
+ }
+
+#ifdef CONFIG_SPI_FLASH_PROTECTION
+ spi_flash_protect(flash, 0);
+#endif
+ erase_bytes = image_size + (flash->erase_size - image_size %
flash->erase_size);
+ printf("Erasing %d bytes (%d blocks) at offset 0 ...", erase_bytes,
erase_bytes/flash->erase_size);
+ ret = spi_flash_erase(flash, 0, erase_bytes);
+ if (ret)
+ printf("Error!\n");
+ else
+ printf("Done!\n");
+
+ printf("Writing %d bytes from 0x%lx to offset 0 ...", (int)image_size,
get_load_addr());
+ ret = spi_flash_write(flash, 0, image_size, (void *)get_load_addr());
+ if (ret)
+ printf("Error!\n");
+ else
+ printf("Done!\n");
+
+#ifdef CONFIG_SPI_FLASH_PROTECTION
+ spi_flash_protect(flash, 1);
+#endif
+
+ return ret;
+}
+
+int is_spi_active(void)
+{
+ return 1;
+}
+#else /* CONFIG_SPI_FLASH */
+#define spi_burn_image 0
+#define is_spi_active 0
+#endif /* CONFIG_SPI_FLASH */
+
+/********************************************************************
+ * NAND services
+ ********************************************************************/
+#ifdef CONFIG_CMD_NAND
+static int nand_burn_image(size_t image_size)
+{
+ int ret, block_size;
+ nand_info_t *nand;
+ int dev = nand_curr_device;
+
+ if ((dev < 0) || (dev >= CONFIG_SYS_MAX_NAND_DEVICE) ||
+ (!nand_info[dev].name)) {
+ puts("\nno devices available\n");
+ return 1;
+ }
+ nand = &nand_info[dev];
+ block_size = nand->erasesize;
+
+ /* Align U-Boot size to currently used blocksize */
+ image_size = ((image_size + (block_size - 1)) & (~(block_size-1)));
+
+ /* Erase the U-BOOT image space */
+ printf("Erasing 0x%x - 0x%x:...", 0, (int)image_size);
+ ret = nand_erase(nand, 0, image_size);
+ if (ret) {
+ printf("Error!\n");
+ goto error;
+ }
+ printf("Done!\n");
+
+ /* Write the image to flash */
+ printf("Writing image:...");
+ printf("&image_size = 0x%p\n", (void*)&image_size);
+ ret = nand_write(nand, 0, &image_size, (void *)get_load_addr());
+ if (ret)
+ printf("Error!\n");
+ else
+ printf("Done!\n");
+
+error:
+ return ret;
+}
+
+int is_nand_active(void)
+{
+ return 1;
+}
+#else /* CONFIG_CMD_NAND */
+#define nand_burn_image 0
+#define is_nand_active 0
+#endif /* CONFIG_CMD_NAND */
+
+/********************************************************************
+ * USB services
+ ********************************************************************/
+#if defined(CONFIG_USB_STORAGE) && defined (CONFIG_BLK)
+static size_t usb_read_file(const char *file_name)
+{
+ loff_t act_read = 0;
+ struct udevice *dev;
+ int rc;
+
+ usb_stop();
+
+ if (usb_init() < 0) {
+ printf("Error: usb_init failed\n");
+ return 0;
+ }
+
+ /* Try to recognize storage devices immediately */
+ blk_first_device(IF_TYPE_USB, &dev);
+ if (dev == NULL) {
+ printf("Error: USB storage device not found\n");
+ return 0;
+ }
+
+ /* Always load from usb 0 */
+ if (fs_set_blk_dev("usb", "0", FS_TYPE_ANY)) {
+ printf("Error: USB 0 not found\n");
+ return 0;
+ }
+
+ /* Perfrom file read */
+ rc = fs_read(file_name, get_load_addr(), 0, 0, &act_read);
+ if (rc)
+ return 0;
+
+ return act_read;
+}
+
+int is_usb_active(void)
+{
+ return 1;
+}
+#else /* defined(CONFIG_USB_STORAGE) && defined (CONFIG_BLK) */
+#define usb_read_file 0
+#define is_usb_active 0
+#endif /* defined(CONFIG_USB_STORAGE) && defined (CONFIG_BLK) */
+
+/********************************************************************
+ * Network services
+ ********************************************************************/
+#ifdef CONFIG_CMD_NET
+static size_t tftp_read_file(const char *file_name)
+{
+ /* update global variable load_addr before tftp file from network */
+ load_addr = get_load_addr();
+ return net_loop(TFTPGET);
+}
+
+int is_tftp_active(void)
+{
+ return 1;
+}
+#else
+#define tftp_read_file 0
+#define is_tftp_active 0
+#endif /* CONFIG_CMD_NET */
+
+
+enum bubt_devices {
+ BUBT_DEV_NET = 0,
+ BUBT_DEV_USB,
+ BUBT_DEV_MMC,
+ BUBT_DEV_SPI,
+ BUBT_DEV_NAND,
+
+ BUBT_MAX_DEV
+};
+
+struct bubt_dev bubt_devs[BUBT_MAX_DEV] = {
+ {"tftp", tftp_read_file, NULL, is_tftp_active},
+ {"usb", usb_read_file, NULL, is_usb_active},
+ {"mmc", mmc_read_file, mmc_burn_image, is_mmc_active},
+ {"spi", NULL, spi_burn_image, is_spi_active},
+ {"nand", NULL, nand_burn_image, is_nand_active},
+};
+
+static int bubt_write_file(struct bubt_dev *dst, size_t image_size)
+{
+ if (!dst->write) {
+ printf("Error: Write not supported on device %s\n", dst->name);
+ return 1;
+ }
+
+ return dst->write(image_size);
+}
+
+#if defined(CONFIG_TARGET_MVEBU_ARMADA_8K)
+uint32_t do_checksum32(uint32_t *start, int32_t len)
+{
+ uint32_t sum = 0;
+ uint32_t *startp = start;
+
+ do {
+ sum += *startp;
+ startp++;
+ len -= 4;
+ } while (len > 0);
+
+ return sum;
+}
+
+static int check_image_header(void)
+{
+ struct mvebu_image_header *hdr = (struct mvebu_image_header
*)get_load_addr();
+ uint32_t header_len = hdr->prolog_size;
+ uint32_t checksum;
+ uint32_t checksum_ref = hdr->prolog_checksum;
+
+ /*
+ * For now compare checksum, and magic. Later we can
+ * verify more stuff on the header like interface type, etc
+ */
+ if (hdr->magic != MAIN_HDR_MAGIC) {
+ printf("ERROR: Bad MAGIC 0x%08x != 0x%08x\n", hdr->magic,
MAIN_HDR_MAGIC);
+ return -ENOEXEC;
+ }
+
+ /* The checksum value is discarded from checksum calculation */
+ hdr->prolog_checksum = 0;
+
+ checksum = do_checksum32((uint32_t *)hdr, header_len);
+ if (checksum != checksum_ref) {
+ printf("Error: Bad Image checksum. 0x%x != 0x%x\n", checksum,
checksum_ref);
+ return -ENOEXEC;
+ }
+
+ /* Restore the checksum before writing */
+ hdr->prolog_checksum = checksum_ref;
+ printf("Image checksum...OK!\n");
+
+ return 0;
+}
+#elif defined(CONFIG_TARGET_MVEBU_DB_88F3720) /* Armada 3700 */
+static int check_image_header(void)
+{
+ struct common_tim_data *hdr = (struct common_tim_data *)get_load_addr();
+ int image_num;
+ u8 hash_160_output[SHA1_SUM_LEN];
+ u8 hash_256_output[SHA256_SUM_LEN];
+ sha1_context hash1_text;
+ sha256_context hash256_text;
+ u8 *hash_output;
+ u32 hash_algorithm_id;
+ u32 image_size_to_hash;
+ u32 flash_entry_addr;
+ u32 *hash_value;
+ u32 internal_hash[HASH_SUM_LEN];
+ const uint8_t *buff;
+ u32 num_of_image = hdr->num_images;
+ u32 version = hdr->version;
+ u32 trusted = hdr->trusted;
+
+ /* bubt checksum validation only supports nontrusted images */
+ if (trusted == 1) {
+ printf("bypass image validation, only untrusted image is
supported now\n");
+ return 0;
+ }
+ /* only supports image version 3.5 and 3.6 */
+ if (version != IMAGE_VERSION_3_5_0 && version != IMAGE_VERSION_3_6_0) {
+ printf("Error: Unsupported Image version = 0x%08x\n", version);
+ return -ENOEXEC;
+ }
+ /* validate images hash value */
+ for (image_num = 0; image_num < num_of_image; image_num++) {
+ struct mvebu_image_info *info = (struct mvebu_image_info
*)(get_load_addr()
+ + sizeof(struct common_tim_data) + image_num *
sizeof(struct mvebu_image_info));
+ hash_algorithm_id = info->hash_algorithm_id;
+ image_size_to_hash = info->image_size_to_hash;
+ flash_entry_addr = info->flash_entry_addr;
+ hash_value = info->hash;
+ buff = (const uint8_t *)(get_load_addr() + flash_entry_addr);
+
+ if (image_num == 0) {
+ /* The first image includes hash values in itself
content. For hash calculation, we need
+ * to save original hash values to local variable that
will be copied back for comparsion
+ * and set all zeros to replace orignal hash values to
calculate its new hash value.
+ * First image original format : x...x (datum1)
x...x(original hash values) x...x(datum2)
+ * Replaced first image format : x...x (datum1)
0...0(hash values) x...x(datum2)
+ */
+ memcpy(internal_hash, hash_value,
sizeof(internal_hash));
+ memset(hash_value, 0, sizeof(internal_hash));
+ }
+ if (image_size_to_hash == 0) {
+ printf("Warning: Image_%d hash checksum is disable,
skip the image validation.\n", image_num);
+ continue;
+ }
+ switch (hash_algorithm_id) {
+ case SHA1_SUM_LEN:
+ sha1_starts(&hash1_text);
+ sha1_update(&hash1_text, buff, image_size_to_hash);
+ sha1_finish(&hash1_text, hash_160_output);
+ hash_output = hash_160_output;
+ break;
+ case SHA256_SUM_LEN:
+ sha256_starts(&hash256_text);
+ sha256_update(&hash256_text, buff, image_size_to_hash);
+ sha256_finish(&hash256_text, hash_256_output);
+ hash_output = hash_256_output;
+ break;
+ default:
+ printf("Error: Unsupported hash_algorithm_id = %d\n",
hash_algorithm_id);
+ return -ENOEXEC;
+ }
+ if (image_num == 0)
+ memcpy(hash_value, internal_hash,
sizeof(internal_hash));
+ if (memcmp(hash_value, hash_output, hash_algorithm_id) != 0) {
+ printf("Error: Image_%d checksum is not correct\n",
image_num);
+ return -ENOEXEC;
+ }
+ }
+ printf("Image checksum...OK!\n");
+ return 0;
+}
+#else
+static int check_image_header(void)
+{
+ printf("bubt cmd does not support this SoC device or family!\n");
+ return -ENOEXEC;
+}
+#endif
+
+static int bubt_verify(size_t image_size)
+{
+
+ /* Check a correct image header exists */
+ if (check_image_header()) {
+ printf("Error: Image header verification failed\n");
+ return 1;
+ }
+ return 0;
+}
+
+
+static int bubt_read_file(struct bubt_dev *src)
+{
+ size_t image_size;
+
+ if (!src->read) {
+ printf("Error: Read not supported on device \"%s\"\n",
src->name);
+ return 0;
+ }
+
+ image_size = src->read(net_boot_file_name);
+ if (image_size <= 0) {
+ printf("Error: Failed to read file %s from %s\n",
net_boot_file_name, src->name);
+ return 0;
+ }
+
+ return image_size;
+}
+
+static int bubt_is_dev_active(struct bubt_dev *dev)
+{
+ if (!dev->active) {
+ printf("Device \"%s\" not supported by U-BOOT image\n",
dev->name);
+ return 0;
+ }
+
+ if (!dev->active()) {
+ printf("Device \"%s\" is inactive\n", dev->name);
+ return 0;
+ }
+
+ return 1;
+}
+
+struct bubt_dev *find_bubt_dev(char *dev_name)
+{
+ int dev;
+
+ for (dev = 0; dev < BUBT_MAX_DEV; dev++) {
+ if (strcmp(bubt_devs[dev].name, dev_name) == 0)
+ return &bubt_devs[dev];
+ }
+
+ return 0;
+}
+
+#define DEFAULT_BUBT_SRC "tftp"
+
+#ifndef DEFAULT_BUBT_DST
+#ifdef CONFIG_MVEBU_SPI_BOOT
+#define DEFAULT_BUBT_DST "spi"
+#elif defined(CONFIG_MVEBU_NAND_BOOT)
+#define DEFAULT_BUBT_DST "nand"
+#elif defined(CONFIG_MVEBU_MMC_BOOT)
+#define DEFAULT_BUBT_DST "mmc"
+else
+#define DEFAULT_BUBT_DST "error"
+#endif
+#endif /* DEFAULT_BUBT_DST */
+
+int do_bubt_cmd(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ struct bubt_dev *src, *dst;
+ size_t image_size;
+ char src_dev_name[8];
+ char dst_dev_name[8];
+ char *name;
+
+ if (argc < 2)
+ copy_filename(net_boot_file_name, CONFIG_MVEBU_UBOOT_DFLT_NAME,
sizeof(net_boot_file_name));
+ else
+ copy_filename(net_boot_file_name, argv[1],
sizeof(net_boot_file_name));
+
+ if (argc >= 3) {
+ strncpy(dst_dev_name, argv[2], 8);
+ } else {
+ name = DEFAULT_BUBT_DST;
+ strncpy(dst_dev_name, name, 8);
+ }
+
+ if (argc >= 4)
+ strncpy(src_dev_name, argv[3], 8);
+ else
+ strncpy(src_dev_name, DEFAULT_BUBT_SRC, 8);
+
+ /* Figure out the destination device */
+ dst = find_bubt_dev(dst_dev_name);
+ if (!dst) {
+ printf("Error: Unknown destination \"%s\"\n", dst_dev_name);
+ return 1;
+ }
+
+ if (!bubt_is_dev_active(dst))
+ return 1;
+
+ /* Figure out the source device */
+ src = find_bubt_dev(src_dev_name);
+ if (!src) {
+ printf("Error: Unknown source \"%s\"\n", src_dev_name);
+ return 1;
+ }
+
+ if (!bubt_is_dev_active(src))
+ return 1;
+
+ printf("Burning U-BOOT image \"%s\" from \"%s\" to \"%s\"\n",
net_boot_file_name, src->name, dst->name);
+
+ image_size = bubt_read_file(src);
+ if (!image_size)
+ return 1;
+
+ if (bubt_verify(image_size))
+ return 1;
+
+ if (bubt_write_file(dst, image_size))
+ return 1;
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ bubt, 4, 0, do_bubt_cmd,
+ "Burn a u-boot image to flash",
+ "[file-name] [destination [source]]\n"
+ "\t-file-name The image file name to burn. Default = u-boot.bin\n"
+ "\t-destination Flash to burn to [spi, nand, mmc]. Default = active
boot device\n"
+ "\t-source The source to load image from [tftp, usb, mmc].
Default = tftp\n"
+ "Examples:\n"
+ "\tbubt - Burn flash-image.bin from tftp to active boot device\n"
+ "\tbubt flash-image-new.bin nand - Burn flash-image-new.bin from tftp
to NAND flash\n"
+ "\tbubt backup-flash-image.bin mmc usb - Burn backup-flash-image.bin
from usb to MMC\n"
+
+);
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
