On 20/11/2016 15:57, Andre Przywara wrote:
Now that the SPL is ready to be compiled in AArch64 and the DRAM
init code is ready, enable SPL support for the A64 SoC and in the
Pine64 defconfig.
For now we keep the boot0 header in the U-Boot proper, as this allows
to still use boot0 as an SPL replacement without hurting the SPL use
case.
We disable FEL support for now, as the code isn't ready yet.
Signed-off-by: Andre Przywara <andre.przyw...@arm.com>
---
arch/arm/include/asm/arch-sunxi/boot0.h | 4 ++--
arch/arm/mach-sunxi/board.c | 2 +-
board/sunxi/Kconfig | 2 ++
configs/pine64_plus_defconfig | 2 ++
include/configs/sunxi-common.h | 2 ++
5 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/arch/arm/include/asm/arch-sunxi/boot0.h
b/arch/arm/include/asm/arch-sunxi/boot0.h
index c31a2af..173e042 100644
--- a/arch/arm/include/asm/arch-sunxi/boot0.h
+++ b/arch/arm/include/asm/arch-sunxi/boot0.h
@@ -4,11 +4,11 @@
* SPDX-License-Identifier: GPL-2.0+
*/
-#if defined(CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER)
+#if defined(CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER) &&
!defined(CONFIG_SPL_BUILD)
/* reserve space for BOOT0 header information */
b reset
.space 1532
-#elif defined(CONFIG_ARM_BOOT_HOOK_RMR)
+#elif defined(CONFIG_ARM_BOOT_HOOK_RMR) && defined(CONFIG_SPL_BUILD)
/* switch into AArch64 if needed */
tst x0, x0 // this is "b #0x84" in ARM
b reset
Shouldn't the hunk above go into the patches that introduce the options?
diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c
index 0f8ead9..80d4b57 100644
--- a/arch/arm/mach-sunxi/board.c
+++ b/arch/arm/mach-sunxi/board.c
@@ -133,7 +133,7 @@ static int gpio_init(void)
return 0;
}
-#ifdef CONFIG_SPL_BUILD
+#if defined(CONFIG_SPL_BOARD_LOAD_IMAGE) && defined(CONFIG_SPL_BUILD)
static int spl_board_load_image(struct spl_image_info *spl_image,
struct spl_boot_device *bootdev)
{
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index d477925..b5246df 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -125,6 +125,7 @@ config MACH_SUN50I
bool "sun50i (Allwinner A64)"
select ARM64
select SUNXI_GEN_SUN6I
+ select SUPPORT_SPL
endchoice
@@ -187,6 +188,7 @@ config DRAM_ODT_EN
bool "sunxi dram odt enable"
default n if !MACH_SUN8I_A23
default y if MACH_SUN8I_A23
+ default y if MACH_SUN50I
---help---
Select this to enable dram odt (on die termination).
diff --git a/configs/pine64_plus_defconfig b/configs/pine64_plus_defconfig
index ebc24b8..5286fee 100644
--- a/configs/pine64_plus_defconfig
+++ b/configs/pine64_plus_defconfig
@@ -2,9 +2,11 @@ CONFIG_ARM=y
CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN50I=y
+CONFIG_DRAM_CLK=672
Do you need this?
Alex
CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pine64-plus"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_CONSOLE_MUX=y
+CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 86b4104..f2cb174 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -182,7 +182,9 @@
#define CONFIG_SPL_FRAMEWORK
+#ifndef CONFIG_MACH_SUN50I
#define CONFIG_SPL_BOARD_LOAD_IMAGE
+#endif
#if defined(CONFIG_MACH_SUN9I)
#define CONFIG_SPL_TEXT_BASE 0x10040 /* sram start+header */
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
