On 22.11.2016 09:48, Chris Packham wrote: > Prepare for move to Kconfig by removing "SYS" from the existing macros. > > Signed-off-by: Chris Packham <judge.pack...@gmail.com> > --- > > README | 2 +- > board/astro/mcf5373l/fpga.c | 4 ++-- > drivers/fpga/ACEX1K.c | 8 ++++---- > drivers/fpga/cyclon2.c | 10 +++++----- > drivers/fpga/spartan2.c | 22 +++++++++++----------- > drivers/fpga/spartan3.c | 20 ++++++++++---------- > drivers/fpga/virtex2.c | 18 +++++++++--------- > include/configs/M54455EVB.h | 2 +- > include/configs/apf27.h | 2 +- > include/configs/astro_mcf5373l.h | 2 +- > include/configs/mt_ventoux.h | 4 ++-- > scripts/config_whitelist.txt | 2 +- > 12 files changed, 48 insertions(+), 48 deletions(-) > > diff --git a/README b/README > index 47bc215fe9c5..fdc194ab9792 100644 > --- a/README > +++ b/README > @@ -2536,7 +2536,7 @@ The following options need to be configured: > Enable support for fpga loadbp command - load partial bitstream > (Xilinx only) > > - CONFIG_SYS_FPGA_PROG_FEEDBACK > + CONFIG_FPGA_PROG_FEEDBACK > > Enable printing of hash marks during FPGA configuration. > > diff --git a/board/astro/mcf5373l/fpga.c b/board/astro/mcf5373l/fpga.c > index 53e00728c3d8..1b53fd2521e3 100644 > --- a/board/astro/mcf5373l/fpga.c > +++ b/board/astro/mcf5373l/fpga.c > @@ -128,7 +128,7 @@ int altera_write_fn(const void *buf, size_t len, int > flush, int cookie) > #if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG) > WATCHDOG_RESET(); > #endif > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > putc('.'); /* let them know we are alive */ > #endif > #ifdef CONFIG_SYS_FPGA_CHECK_CTRLC > @@ -347,7 +347,7 @@ int xilinx_fastwr_config_fn(void *buf, size_t len, int > flush, int cookie) > #if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG) > WATCHDOG_RESET(); > #endif > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > putc('.'); /* let them know we are alive */ > #endif > #ifdef CONFIG_SYS_FPGA_CHECK_CTRLC > diff --git a/drivers/fpga/ACEX1K.c b/drivers/fpga/ACEX1K.c > index 1627f0e6ffde..1fb60e5983c3 100644 > --- a/drivers/fpga/ACEX1K.c > +++ b/drivers/fpga/ACEX1K.c > @@ -112,7 +112,7 @@ static int ACEX1K_ps_load(Altera_desc *desc, const void > *buf, size_t bsize) > "done:\t0x%p\n\n", > __FUNCTION__, &fn, fn, fn->config, fn->status, > fn->clk, fn->data, fn->done); > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > printf ("Loading FPGA Device %d...", cookie); > #endif > > @@ -188,7 +188,7 @@ static int ACEX1K_ps_load(Altera_desc *desc, const void > *buf, size_t bsize) > i --; > } while (i > 0); > > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > if (bytecount % (bsize / 40) == 0) > putc ('.'); /* let them know we are > alive */ > #endif > @@ -196,7 +196,7 @@ static int ACEX1K_ps_load(Altera_desc *desc, const void > *buf, size_t bsize) > > CONFIG_FPGA_DELAY (); > > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > putc (' '); /* terminate the dotted line */ > #endif > > @@ -223,7 +223,7 @@ static int ACEX1K_ps_load(Altera_desc *desc, const void > *buf, size_t bsize) > > ret_val = FPGA_SUCCESS; > > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > if (ret_val == FPGA_SUCCESS) { > puts ("Done.\n"); > } > diff --git a/drivers/fpga/cyclon2.c b/drivers/fpga/cyclon2.c > index 8ab7679b48f7..2be1c1a40a23 100644 > --- a/drivers/fpga/cyclon2.c > +++ b/drivers/fpga/cyclon2.c > @@ -115,7 +115,7 @@ static int CYC2_ps_load(Altera_desc *desc, const void > *buf, size_t bsize) > "done:\t0x%p\n\n", > __FUNCTION__, &fn, fn, fn->config, fn->status, > fn->write, fn->done); > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > printf ("Loading FPGA Device %d...", cookie); > #endif > > @@ -153,13 +153,13 @@ static int CYC2_ps_load(Altera_desc *desc, const void > *buf, size_t bsize) > (*fn->abort) (cookie); > return FPGA_FAIL; > } > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > puts(" OK? ..."); > #endif > > CONFIG_FPGA_DELAY (); > > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > putc (' '); /* terminate the dotted line */ > #endif > > @@ -172,13 +172,13 @@ static int CYC2_ps_load(Altera_desc *desc, const void > *buf, size_t bsize) > (*fn->abort) (cookie); > return (FPGA_FAIL); > } > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > puts(" OK\n"); > #endif > > ret_val = FPGA_SUCCESS; > > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > if (ret_val == FPGA_SUCCESS) { > puts ("Done.\n"); > } > diff --git a/drivers/fpga/spartan2.c b/drivers/fpga/spartan2.c > index 859fb3c7787a..45e8534cdcb5 100644 > --- a/drivers/fpga/spartan2.c > +++ b/drivers/fpga/spartan2.c > @@ -16,7 +16,7 @@ > #endif > > #undef CONFIG_SYS_FPGA_CHECK_BUSY > -#undef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#undef CONFIG_FPGA_PROG_FEEDBACK > > /* Note: The assumption is that we cannot possibly run fast enough to > * overrun the device (the Slave Parallel mode can free run at 50MHz). > @@ -135,7 +135,7 @@ static int spartan2_sp_load(xilinx_desc *desc, const void > *buf, size_t bsize) > * Continuous Data Loading in Slave Parallel Mode for > * the Spartan-II Family. > */ > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > printf ("Loading FPGA Device %d...\n", cookie); > #endif > /* > @@ -197,7 +197,7 @@ static int spartan2_sp_load(xilinx_desc *desc, const void > *buf, size_t bsize) > } > #endif > > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > if (bytecount % (bsize / 40) == 0) > putc ('.'); /* let them know we are > alive */ > #endif > @@ -207,7 +207,7 @@ static int spartan2_sp_load(xilinx_desc *desc, const void > *buf, size_t bsize) > (*fn->cs) (false, true, cookie); /* Deassert the chip > select */ > (*fn->wr) (false, true, cookie); /* Deassert the write > pin */ > > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > putc ('\n'); /* terminate the dotted line */ > #endif > > @@ -235,7 +235,7 @@ static int spartan2_sp_load(xilinx_desc *desc, const void > *buf, size_t bsize) > if (*fn->post) > (*fn->post) (cookie); > > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > if (ret_val == FPGA_SUCCESS) > puts ("Done.\n"); > else > @@ -271,7 +271,7 @@ static int spartan2_sp_dump(xilinx_desc *desc, const void > *buf, size_t bsize) > (*fn->clk) (false, true, cookie); /* Deassert the > clock pin */ > (*fn->clk) (true, true, cookie); /* Assert the > clock pin */ > (*fn->rdata) (&(data[bytecount++]), cookie); /* read > the data */ > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > if (bytecount % (bsize / 40) == 0) > putc ('.'); /* let them know we are > alive */ > #endif > @@ -281,7 +281,7 @@ static int spartan2_sp_dump(xilinx_desc *desc, const void > *buf, size_t bsize) > (*fn->clk) (false, true, cookie); /* Deassert the clock > pin */ > (*fn->clk) (true, true, cookie); /* Assert the clock pin > */ > > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > putc ('\n'); /* terminate the dotted line */ > #endif > puts ("Done.\n"); > @@ -323,7 +323,7 @@ static int spartan2_ss_load(xilinx_desc *desc, const void > *buf, size_t bsize) > "done:\t0x%p\n\n", > __FUNCTION__, &fn, fn, fn->pgm, fn->init, > fn->clk, fn->wr, fn->done); > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > printf ("Loading FPGA Device %d...\n", cookie); > #endif > > @@ -386,7 +386,7 @@ static int spartan2_ss_load(xilinx_desc *desc, const void > *buf, size_t bsize) > i --; > } while (i > 0); > > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > if (bytecount % (bsize / 40) == 0) > putc ('.'); /* let them know we are > alive */ > #endif > @@ -394,7 +394,7 @@ static int spartan2_ss_load(xilinx_desc *desc, const void > *buf, size_t bsize) > > CONFIG_FPGA_DELAY (); > > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > putc ('\n'); /* terminate the dotted line */ > #endif > > @@ -426,7 +426,7 @@ static int spartan2_ss_load(xilinx_desc *desc, const void > *buf, size_t bsize) > if (*fn->post) > (*fn->post) (cookie); > > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > if (ret_val == FPGA_SUCCESS) > puts ("Done.\n"); > else > diff --git a/drivers/fpga/spartan3.c b/drivers/fpga/spartan3.c > index b0213e69992b..759ad95e2afc 100644 > --- a/drivers/fpga/spartan3.c > +++ b/drivers/fpga/spartan3.c > @@ -139,7 +139,7 @@ static int spartan3_sp_load(xilinx_desc *desc, const void > *buf, size_t bsize) > * Continuous Data Loading in Slave Parallel Mode for > * the Spartan-II Family. > */ > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > printf ("Loading FPGA Device %d...\n", cookie); > #endif > /* > @@ -201,7 +201,7 @@ static int spartan3_sp_load(xilinx_desc *desc, const void > *buf, size_t bsize) > } > #endif > > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > if (bytecount % (bsize / 40) == 0) > putc ('.'); /* let them know we are > alive */ > #endif > @@ -211,7 +211,7 @@ static int spartan3_sp_load(xilinx_desc *desc, const void > *buf, size_t bsize) > (*fn->cs) (false, true, cookie); /* Deassert the chip > select */ > (*fn->wr) (false, true, cookie); /* Deassert the write > pin */ > > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > putc ('\n'); /* terminate the dotted line */ > #endif > > @@ -241,7 +241,7 @@ static int spartan3_sp_load(xilinx_desc *desc, const void > *buf, size_t bsize) > if (*fn->post) > (*fn->post) (cookie); > > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > if (ret_val == FPGA_SUCCESS) > puts ("Done.\n"); > else > @@ -277,7 +277,7 @@ static int spartan3_sp_dump(xilinx_desc *desc, const void > *buf, size_t bsize) > (*fn->clk) (false, true, cookie); /* Deassert the > clock pin */ > (*fn->clk) (true, true, cookie); /* Assert the > clock pin */ > (*fn->rdata) (&(data[bytecount++]), cookie); /* read > the data */ > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > if (bytecount % (bsize / 40) == 0) > putc ('.'); /* let them know we are > alive */ > #endif > @@ -287,7 +287,7 @@ static int spartan3_sp_dump(xilinx_desc *desc, const void > *buf, size_t bsize) > (*fn->clk) (false, true, cookie); /* Deassert the clock > pin */ > (*fn->clk) (true, true, cookie); /* Assert the clock pin > */ > > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > putc ('\n'); /* terminate the dotted line */ > #endif > puts ("Done.\n"); > @@ -329,7 +329,7 @@ static int spartan3_ss_load(xilinx_desc *desc, const void > *buf, size_t bsize) > "done:\t0x%p\n\n", > __FUNCTION__, &fn, fn, fn->pgm, fn->init, > fn->clk, fn->wr, fn->done); > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > printf ("Loading FPGA Device %d...\n", cookie); > #endif > > @@ -401,7 +401,7 @@ static int spartan3_ss_load(xilinx_desc *desc, const void > *buf, size_t bsize) > i --; > } while (i > 0); > > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > if (bytecount % (bsize / 40) == 0) > putc ('.'); /* let them > know we are alive */ > #endif > @@ -410,7 +410,7 @@ static int spartan3_ss_load(xilinx_desc *desc, const void > *buf, size_t bsize) > > CONFIG_FPGA_DELAY (); > > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > putc ('\n'); /* terminate the dotted line */ > #endif > > @@ -444,7 +444,7 @@ static int spartan3_ss_load(xilinx_desc *desc, const void > *buf, size_t bsize) > if (*fn->post) > (*fn->post) (cookie); > > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > if (ret_val == FPGA_SUCCESS) > puts ("Done.\n"); > else > diff --git a/drivers/fpga/virtex2.c b/drivers/fpga/virtex2.c > index f7cf02ab5b30..cf7723c46f64 100644 > --- a/drivers/fpga/virtex2.c > +++ b/drivers/fpga/virtex2.c > @@ -39,8 +39,8 @@ > #define CONFIG_FPGA_DELAY() > #endif > > -#ifndef CONFIG_SYS_FPGA_PROG_FEEDBACK > -#define CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifndef CONFIG_FPGA_PROG_FEEDBACK > +#define CONFIG_FPGA_PROG_FEEDBACK > #endif > > /* > @@ -190,7 +190,7 @@ static int virtex2_ssm_load(xilinx_desc *desc, const void > *buf, size_t bsize) > fn->clk, fn->cs, fn->wr, fn->rdata, fn->wdata, > fn->busy, fn->abort, fn->post); > > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > printf ("Initializing FPGA Device %d...\n", cookie); > #endif > /* > @@ -294,7 +294,7 @@ static int virtex2_ssm_load(xilinx_desc *desc, const void > *buf, size_t bsize) > } > #endif > > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > if (bytecount % (bsize / 40) == 0) > putc ('.'); > #endif > @@ -307,7 +307,7 @@ static int virtex2_ssm_load(xilinx_desc *desc, const void > *buf, size_t bsize) > (*fn->cs) (false, true, cookie); > (*fn->wr) (false, true, cookie); > > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > putc ('\n'); > #endif > > @@ -329,7 +329,7 @@ static int virtex2_ssm_load(xilinx_desc *desc, const void > *buf, size_t bsize) > } > > if (ret_val == FPGA_SUCCESS) { > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > printf ("Initialization of FPGA device %d complete\n", > cookie); > #endif > /* > @@ -339,7 +339,7 @@ static int virtex2_ssm_load(xilinx_desc *desc, const void > *buf, size_t bsize) > (*fn->post) (cookie); > } > } else { > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > printf ("** Initialization of FPGA device %d FAILED\n", > cookie); > #endif > @@ -382,7 +382,7 @@ static int virtex2_ssm_dump(xilinx_desc *desc, const void > *buf, size_t bsize) > (*fn->clk) (false, true, cookie); > (*fn->clk) (true, true, cookie); > (*fn->rdata) (&(data[bytecount++]), cookie); > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > if (bytecount % (bsize / 40) == 0) > putc ('.'); > #endif > @@ -395,7 +395,7 @@ static int virtex2_ssm_dump(xilinx_desc *desc, const void > *buf, size_t bsize) > (*fn->clk) (false, true, cookie); > (*fn->clk) (true, true, cookie); > > -#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK > +#ifdef CONFIG_FPGA_PROG_FEEDBACK > putc ('\n'); > #endif > puts ("Done.\n"); > diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h > index abec3737a498..d80521664611 100644 > --- a/include/configs/M54455EVB.h > +++ b/include/configs/M54455EVB.h > @@ -193,7 +193,7 @@ > /* experiment > #define CONFIG_FPGA > #define CONFIG_FPGA_COUNT 1 > -#define CONFIG_SYS_FPGA_PROG_FEEDBACK > +#define CONFIG_FPGA_PROG_FEEDBACK > #define CONFIG_SYS_FPGA_CHECK_CTRLC > */ > > diff --git a/include/configs/apf27.h b/include/configs/apf27.h > index b903ba53d1dc..a97ba9f39c50 100644 > --- a/include/configs/apf27.h > +++ b/include/configs/apf27.h > @@ -267,7 +267,7 @@ > #define CONFIG_FPGA_XILINX > #define CONFIG_FPGA_SPARTAN3 > #define CONFIG_SYS_FPGA_WAIT 250 /* 250 ms */ > -#define CONFIG_SYS_FPGA_PROG_FEEDBACK > +#define CONFIG_FPGA_PROG_FEEDBACK > #define CONFIG_SYS_FPGA_CHECK_CTRLC > #define CONFIG_SYS_FPGA_CHECK_ERROR > > diff --git a/include/configs/astro_mcf5373l.h > b/include/configs/astro_mcf5373l.h > index e8dca0b2ccdc..0af356bcb49d 100644 > --- a/include/configs/astro_mcf5373l.h > +++ b/include/configs/astro_mcf5373l.h > @@ -209,7 +209,7 @@ > #define CONFIG_FPGA_SPARTAN3 > #define CONFIG_FPGA_ALTERA > #define CONFIG_FPGA_CYCLON2 > -#define CONFIG_SYS_FPGA_PROG_FEEDBACK > +#define CONFIG_FPGA_PROG_FEEDBACK > #define CONFIG_SYS_FPGA_WAIT 1000 > > /* End of user parameters to be customized */ > diff --git a/include/configs/mt_ventoux.h b/include/configs/mt_ventoux.h > index 2420612800fb..1353b11b1250 100644 > --- a/include/configs/mt_ventoux.h > +++ b/include/configs/mt_ventoux.h > @@ -45,11 +45,11 @@ > #define CONFIG_FPGA > #define CONFIG_FPGA_XILINX > #define CONFIG_FPGA_SPARTAN3 > -#define CONFIG_SYS_FPGA_PROG_FEEDBACK > +#define CONFIG_FPGA_PROG_FEEDBACK > #define CONFIG_SYS_FPGA_WAIT 10000 > #define CONFIG_MAX_FPGA_DEVICES 1 > #define CONFIG_FPGA_DELAY() udelay(1) > -#define CONFIG_SYS_FPGA_PROG_FEEDBACK > +#define CONFIG_FPGA_PROG_FEEDBACK > > #define CONFIG_SPLASH_SCREEN > #define CONFIG_VIDEO_BMP_RLE8 > diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt > index fc2a08a85661..4a2e894367a6 100644 > --- a/scripts/config_whitelist.txt > +++ b/scripts/config_whitelist.txt > @@ -5314,7 +5314,7 @@ CONFIG_SYS_FPGA_PHY0_INT > CONFIG_SYS_FPGA_PHY1_INT > CONFIG_SYS_FPGA_PRG > CONFIG_SYS_FPGA_PROG > -CONFIG_SYS_FPGA_PROG_FEEDBACK > +CONFIG_FPGA_PROG_FEEDBACK > CONFIG_SYS_FPGA_PROG_TIME > CONFIG_SYS_FPGA_PTR > CONFIG_SYS_FPGA_REG_BASE >
This is breaking buildman. You should introduce Kconfig option in first patch and than this one. [u-boot]$ ./tools/buildman/buildman apf27 -c 2 boards.cfg is up to date. Nothing to do. Building current source for 1 boards (1 thread, 8 jobs per thread) arm: + apf27 ) +comm: file 2 is not in sorted order +Error: You must add new CONFIG options using Kconfig +The following new ad-hoc CONFIG options were detected: +CONFIG_FPGA_PROG_FEEDBACK + +Please add these via Kconfig instead. Find a suitable Kconfig +file and add a 'config' or 'menuconfig' option. +make[1]: *** [all] Error 1 +make: *** [sub-make] Error 2 0 0 1 /1 apf27 Thanks, Michal _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot